H1B
-
buckosbikes
- Posts: 2
- Joined: Tue Jan 23, 2018 8:18 am
- Location: Norfolk
H1B
Hi all. Just joined the club. I've just bought a H1b which had been sitting in a shed for years. Have had it running, after checking the bores and cleaning out the carbs. After several kicks it ran and sounded good. The previous owner told me he thought it was sold from baycover in lowestoft when new. Any info would be appreciated. Thanks.
You do not have the required permissions to view the files attached to this post.
- Triple Parts
- Expert
- Posts: 6494
- Joined: Fri May 12, 2006 11:00 am
- Location: Lancashire Riviera
- Contact:
Re: H1B
Great find 
FREE Triples downloads here... https://kawatriple.net/
Triples Parts here...https://kawasakitripleparts.com/
Triples Parts here...https://kawasakitripleparts.com/
-
Nigel S
- Expert
- Posts: 2123
- Joined: Wed Sep 17, 2008 9:54 am
- Location: Lowestoft
Re: H1B
Welcome to the club.
Possibly sold from Lowestoft Kawasaki, but not Baycover. Peter Smith whok ran Lowestoft Kawasaki opened his own shop where Baycover is now in 1978 ish. He went into partnership with Terry who owned all the triples in Baycover.
I originally owned one of the last H2C,s that came out of Kawasakii Lowestoft that was KRT 903 P.
NICE BIKE and great find
Possibly sold from Lowestoft Kawasaki, but not Baycover. Peter Smith whok ran Lowestoft Kawasaki opened his own shop where Baycover is now in 1978 ish. He went into partnership with Terry who owned all the triples in Baycover.
I originally owned one of the last H2C,s that came out of Kawasakii Lowestoft that was KRT 903 P.
NICE BIKE and great find
Ever started something you wish you had'nt.
-
robh1f
- Expert
- Posts: 3032
- Joined: Wed May 03, 2006 8:05 pm
- Location: Essex Coast
Re: H1B
WOW good find !!! .....like a few UK "b"s its on a M plate as the newer models came in and they got left on the showroom floor?? If you are doing a proper resto I have NOS clocks and iggy switch as well as other small parts so let me know. Good luck mate

- Olde Coney
- Expert
- Posts: 5635
- Joined: Wed May 03, 2006 8:05 pm
- Location: CUMBRIA
-
buckosbikes
- Posts: 2
- Joined: Tue Jan 23, 2018 8:18 am
- Location: Norfolk
Re: H1B
Thanks for the replies. I'm finishing off my gpz900 first before i make a start on it. I'm not doing a full nut and bolt resto on it but still want it to look nice. No doubt i'll be asking for advice and parts as i go on.
Thanks again
Thanks again