Crank Refurbished

Eric · Post by **Eric** » Sat Mar 02, 2019 7:40 am

Just had my crank done by Mr Clarke, once again another excellent job. Thanks Gary.

SAM · Post by **SAM** » Sat Mar 02, 2019 8:32 am

Gary just doing my H2c after 12 years of use.
Very nice chap.

downpipe3 · Post by **downpipe3** » Mon Mar 04, 2019 7:16 am

thanks Eric

gsxrtriple · Post by **gsxrtriple** » Wed Mar 06, 2019 5:53 pm

just got mine back for one of my h1s top work again gary many thanks

robh1f · Post by **robh1f** » Fri Mar 08, 2019 7:11 pm

Yeah ,,,,,I've heard he does a good job :wink: :wink:

gsxrtriple · Post by **gsxrtriple** » Fri Mar 08, 2019 8:17 pm

oh boy yes he does

SAM · Post by **SAM** » Fri Mar 08, 2019 8:46 pm

That's enough guys we don't want him to think he's too valuable

robh1f · Post by **robh1f** » Fri Mar 08, 2019 11:05 pm

True true

downpipe3 · Post by **downpipe3** » Sat Mar 09, 2019 7:25 am

i treat each one as if it were going in my own bike I sign and number them aswell

Tartan Triple · Post by **Tartan Triple** » Sat Mar 09, 2019 10:36 am

still not managed to break the last one he did for me

mileage tester for cranky cranks

Kezsam1 · Post by **Kezsam1** » Sat Mar 09, 2019 11:15 am

I've broke a few

downpipe3 · Post by **downpipe3** » Sun Mar 10, 2019 10:39 am

Tartan Triple wrote:still not managed to break the last one he did for me mileage tester for cranky cranks

Yoss · Post by **Yoss** » Fri Mar 15, 2019 8:17 pm

Do you do Yamaha cranks? I have a YR5 that may need one!!

downpipe3 · Post by **downpipe3** » Sat Mar 16, 2019 1:50 pm

Yoss wrote:Do you do Yamaha cranks? I have a YR5 that may need one!!

I do some what is yr5 ? 350 ? if its same as rd 350 /400/250 then yes

Yoss · Post by **Yoss** » Sat Mar 16, 2019 3:14 pm

Ah good,
and yes it is a1972 350, same as an RD but was the model before, without reed valves.
Haven't got it completely apart yet but there's a bit of play in a big end. So it will need doing.
I will keep you posted..

Thanks Steve.

Eric · Post by **Eric** » Sat Mar 16, 2019 5:20 pm

Chris did a YR5 for me Garry.

downpipe3 · Post by **downpipe3** » Sun Mar 17, 2019 7:44 am

Eric wrote:Chris did a YR5 for me Garry.

yes i believe its same as rd350 ? if so ive done a few rd 350s

downpipe3 · Post by **downpipe3** » Sun Mar 17, 2019 7:45 am

Yoss wrote:Ah good,
and yes it is a1972 350, same as an RD but was the model before, without reed valves.
Haven't got it completely apart yet but there's a bit of play in a big end. So it will need doing.
I will keep you posted..

Thanks Steve.

no problem I just done one for a guy from France

Yoss · Post by **Yoss** » Sun Mar 17, 2019 7:20 pm

I've got the crank out, and it definitely needs rebuilding!
My son is passing your way this wednesday midday (you still in the same place?)
Is it OK for him to drop it off?

Thanks Steve.

downpipe3 · Post by **downpipe3** » Mon Mar 18, 2019 7:02 am

Yoss wrote:I've got the crank out, and it definitely needs rebuilding!
My son is passing your way this wednesday midday (you still in the same place?)
Is it OK for him to drop it off?

Thanks Steve.

yes mate perfect

Doctorpayday · Post by **Doctorpayday** » Mon Mar 18, 2019 12:35 pm

Has performed life saving treatment on yet another crank for me.

Thanks Gazza

Gazza

downpipe3 · Post by **downpipe3** » Tue Mar 19, 2019 11:07 am

no problem I should have your motor finished this week mate

Kawasaki Triples Club

Crank Refurbished

Crank Refurbished

Re: Crank Refurbished

Re: Crank Refurbished

Re: Crank Refurbished

Re: Crank Refurbished

Re: Crank Refurbished

Re: Crank Refurbished

Re: Crank Refurbished

Re: Crank Refurbished

Re: Crank Refurbished

Re: Crank Refurbished

Re: Crank Refurbished

Re: Crank Refurbished

Re: Crank Refurbished

Re: Crank Refurbished

Re: Crank Refurbished

Re: Crank Refurbished

Re: Crank Refurbished

Re: Crank Refurbished

Re: Crank Refurbished

Re: Crank Refurbished

Re: Crank Refurbished