My H2

Any triple related issues, topics or stories then POST THEM HERE.......
Tilly H2C
Expert
Posts: 547
Joined: Wed Dec 12, 2018 7:13 pm
Location: Cheshire

Re: My H2

Post by Tilly H2C »

Usually the fuel creeping between the brass pipe and the carb body,the pipe is just a push fit into the carb, pull the brass pipe out, clean it up (and the hole in the carb) apply some fuel proof loctite and press it back in :)
User avatar
scouse
Expert
Posts: 4811
Joined: Wed May 03, 2006 8:05 pm
Location: Knottingley

Re: My H2

Post by scouse »

Oh FFS, thanks Tony, not sure why I didn't check your site :roll:
Apparently the post office has "lost" two days worth of parcels from this company.
I usually check to see if what I want is available but I just ended up down a rabbit hole.
I'll give it a few days if nothing turns up, I'll give you a bell and cancel my other Thumbs Up
Boffin in a coffin
User avatar
Triple Parts
Expert
Posts: 6333
Joined: Fri May 12, 2006 11:00 am
Location: Lancashire Riviera
Contact:

Re: My H2

Post by Triple Parts »

No worries Gary, just bear in mind that those split links we stock are for standard Heavy Duty chains, not O-ring or X-ring Thumbs Up
FREE Triples downloads here... https://kawatriple.net/
Triples Parts here...https://kawasakitripleparts.com/
User avatar
scouse
Expert
Posts: 4811
Joined: Wed May 03, 2006 8:05 pm
Location: Knottingley

Re: My H2

Post by scouse »

I just need a standard one, I only have 70 BHP Thumbs Up
Boffin in a coffin
User avatar
scouse
Expert
Posts: 4811
Joined: Wed May 03, 2006 8:05 pm
Location: Knottingley

Re: My H2

Post by scouse »

It's been a while...
Some of you will be aware that my 69 H1 let me down in the winter, I found a few things wrong including pitted front forks.
IMG_20250522_121026_1.jpg
The bikes all back together, however it handles like a shopping trolley with wonky wheels.
Nio time so investigate as we're off to a gig in Liverpool tonight
So my B will be making an appearance, see some of you tomorrow Thumbs Up
You do not have the required permissions to view the files attached to this post.
Boffin in a coffin
User avatar
scouse
Expert
Posts: 4811
Joined: Wed May 03, 2006 8:05 pm
Location: Knottingley

Re: My H2

Post by scouse »

So some of you will know my H2 has been together around a fortnight, as ever with every non standard build there's always little tweaks to get things right.
The full story will be in the club mag Thumbs Up
Tonight I had to chop the end of the oil feed pipe off to the pump as it was leaking, hopefully tomorrow the very small drip will be no more.
However I've had issues with my alloy throttle body rotating and it wasn't until I was looking up from doing the oil pump I discovered why
IMG_20250728_195510_1.jpg
I've never seen a housing crack before, but these bikes are getting older so I suspect we'll be finding new ways to bamboozle us
Luckily I have a spare
You do not have the required permissions to view the files attached to this post.
Boffin in a coffin
User avatar
scouse
Expert
Posts: 4811
Joined: Wed May 03, 2006 8:05 pm
Location: Knottingley

Re: My H2

Post by scouse »

Well it's now all back together, 5 to 10 and all is well
Tomorrow I'll be taking it to work
That will be it's proper shake down
I just hope nothing falls off, including me :lol:
Boffin in a coffin
User avatar
skub
Expert
Posts: 1315
Joined: Sun May 21, 2023 9:30 pm
Location: County Antrim

Re: My H2

Post by skub »

Every journey is an adventure. :lol:
User avatar
scouse
Expert
Posts: 4811
Joined: Wed May 03, 2006 8:05 pm
Location: Knottingley

Re: My H2

Post by scouse »

It was raining this morning so I whimped out and can in the car
Boffin in a coffin
CJWChris
Newbie
Posts: 35
Joined: Wed Aug 20, 2014 10:05 pm
Location: Wirral

Re: My H2

Post by CJWChris »

Loving this article, as you have shown, perseverance is the key. Looking forward to reading more πŸ˜€
Post Reply