JT Front Sprockets

[Nigel Thorpe]

Hi all. Bike = H2C. Wanted to ask if anyone has tried, or succeeded, in buying the correct JT front sprocket recently. I've recently ordered 15 and a 16 teeth sprockets (JTF508-15 and 16), yet, despite their catalogue clearly showing a picture of a sprocket with the 4mm hole for the tab of the sprocket nut locking washer, both have arrived without the holes, so are essentially unusable. Tried contacting JT or the distributor and they just don't want to know, despite their site saying they are happy to assist with enquiries.
Wondering if anyone has had similar problems and how/if they got around it.
Thank you.

[Olde Coney]

i think Kawasaki triple parts will sell the correct item

[skub]

i think Kawasaki triple parts will sell the correct item

14,15 and 16 on tripleparts. They all have the tab washer hole.
https://kawasakitripleparts.com/?s=spro ... e_aws=true

[Nigel Thorpe]

OK thanks for that. I am/was trying to stay with JT but no more. I'll order from Tony. Thanks.

[Wolfie]

Many of us don't use the silly Tab Washer anyway.. Loctite is a 21st Century solution..

[scouse]

Many of us don't use the silly Tab Washer anyway.. Loctite is a 21st Century solution..

We all know why that is don't we ?

[husson73]

I use both

[Nigel Thorpe]

I use both

I am heading that way as well!

[Wolfie]

Meantime, one of the Frenchies has come up with an interesting idea...

blocagecroupsb2.jpg

blocagecroupsb1.jpg

[Zytec]

Meantime, one of the Frenchies has come up with an interesting idea...

blocagecroupsb2.jpg


blocagecroupsb1.jpg

Thats a neat idea and I suppose that it would not cause any balance issues as the locating screw is so small

[scouse]

Meantime, one of the Frenchies has come up with an interesting idea...

blocagecroupsb2.jpg


blocagecroupsb1.jpg

Honda use two bolts and you rotate the washer ,90 degrees ( it has the pattern of the sprocket and groove)
So it's nothing new