Youngsters H1D

[Marve114]

My bad I just checked my pictures from when I took her apart ...

And yes I've got it upside down I will correct that tomorrow

[Marve114]

Oh I forgot I also ordered my HIGGSPEED exhaust on Friday

I went for the upswept can't wait to see those

[Marve114]

So not been idle actually very busy

Engine parts are back mr cranky Clarke has worked his magic ..

I've been doing a bit of paint stripping very satisfying seeing it all come together .

Another order in with Simon at triple parts I need a discount code man !!!


Swapped out the cases so we will be running correct D cases
So far nice and easy to build

[malc87]

Its coming together,keep the pics coming

[Doctorpayday]

Hi young un

Got some slightly better fork legs, which might get you out of jail, for a while.

Doc

[Doctorpayday]

Hi young un

Got some slightly better fork legs, which might get you out of jail, for a while.

Doc

[Marve114]

It's all good I'm nearly sorted on the front forks


Just need to get hold of the sealing washers for the bottom Allen key

[Marve114]

Forks have had a little polish up and are now oiled up sorted







So hopefully that's the end of that for now all the bearings done so should be sweet

So now she's waiting for parts

[Marve114]

Crank cases torqued up tonight that went smoothly



Looking mighty fine

Even managed to get the kick start setup first time



Gotta source a gear change hub spring as I can't find one in the jigsaw of engine parts I've got .

So I've moved my focus to the pistons and barrels
Will update with pictures of that tomorrow once I've done a bit more

[Triple Parts]

Coming along nicely

[Marve114]

Top end on this morning got a day off work and the bloody body clock had me up so waste not want not

[Marve114]

Slowly coming together

[malc87]

Coming along VERY quickly!!
keep those pics coming

[Barrie]

Who's that ugly B...tard in the mirror?

[Marve114]

Who's that ugly B...tard in the mirror?

That handsome B@*#%D is me



















Been an eventful day done a bit of polishing and that sorta boring stuff

But my highlight was getting some floor space back and emptying a few boxes and building this engine
I'm chuffed it's back in the frame now

[Barrie]

Super !

[Marve114]

Cheers Bazza

Itching to get back out there and do a bit more, Exciting

[Marve114]

Got out side today and got the motor shined up and bolted up tight, fitted the chain and chain cover .

Cleaned the coils and mounted them then the indicators and head light ears and shell

Also put the front mudguard on






With this done I've moved my focus over to the carbs going to give them a good clean out and replace the float valves and seats
And then stick them on the bike

[Marve114]

Not been idle been busy ordering yet more parts and cleaning and building

My latest was the carbs





Also working on the clocks but not a lot is happening there until more parts arrive

[Barrie]

If those plug caps are of the resistor type (5k) , get rid of them !
Get some caps with no resistors .

[Marve114]

Been a busy bee, getting stuff done got the old girl sparking.

Been a learning curve


This ignition switch is screwed but don't despair I've repaired my original

Had to replace the speedo so swapped out the clock faces and reset the speedo

[Marve114]

Well a lot has happened since this .....

Bike was up and running by march as soon as I received my higgspeeds
She is also moted and insured just gotta send off the paper work to dvla

Il put some pictures up now











Clearance is clearance right !!!!




All the paint was sand blasted off



Clear coat to go