Page 1 of 1
Longer H2 side stand
Posted: Wed Feb 18, 2015 9:29 pm
by BIG H
I have put a write up on one of the Americam forums
about using a longer side stand on H2`s from a
modern bike.
http://kawasakitriples.myfastforum.org/about8758.html
Re: Longer H2 side stand
Posted: Mon Feb 23, 2015 6:14 pm
by stevie747
I think a KH500 one will go straight on (if you can find one...), and is longer, but the foot tab has to be bent to copy the H2 shape :wink:
Re: Longer H2 side stand
Posted: Mon Feb 23, 2015 10:21 pm
by gary62
If a kh500 fits then a s3 should and thay are longer
Re: Longer H2 side stand
Posted: Mon Feb 23, 2015 10:47 pm
by Malcolm
The S1/2/3/kh stands all fit and are longer
Re: Longer H2 side stand
Posted: Tue Feb 24, 2015 8:36 am
by BIG H
You lot have missed the point.
I used a side stand from a modern bike so as not to
use up a rare & valuable (& expensive) stand from other triples.
Re: Longer H2 side stand
Posted: Tue Feb 24, 2015 9:11 am
by Nigel S
For my h2s I bought zxr 750 side stands and cut and welded a section in. Perfect.
Re: Longer H2 side stand
Posted: Tue Feb 24, 2015 10:08 am
by stevie747
Nigel S wrote:For my h2s I bought zxr 750 side stands and cut and welded a section in. Perfect.
Sounds easy...
Re: Longer H2 side stand
Posted: Wed Feb 25, 2015 6:43 am
by Nigel S
stevie747 wrote:Nigel S wrote:For my h2s I bought zxr 750 side stands and cut and welded a section in. Perfect.
Sounds easy...
It is, if you have a mig set in the garage. If not then just bring your bike over one day and we can do it together.
Re: Longer H2 side stand
Posted: Sat Feb 28, 2015 9:12 pm
by Richard S
stevie747 wrote:Nigel S wrote:For my h2s I bought zxr 750 side stands and cut and welded a section in. Perfect.
Sounds easy...
Nigel is not letting on he is a coded welder
he did my stand super job .