Kawasaki Triples Club

Ok gents
You pointed me in the right direction towards Neil the Don for my paint work, so now onto the frame paint or powder coat that is the question!!!
While I'm here, where to go for decent chrome plating and lastly best two stroke oil to use, I'd love to use castrol R but I know that's not a wise choice, this is my first tripple can you tell lol
Thanks

Hi,
We do powder coating. Text me 07914 847677 or email klawsuc@freeuk.com if interested. Phil

Hi Phil ok will do thanks

Any half decent semi- synthetic 2 stroke oil so far as I am concerned, but I bet you get 100 different opinions - definitely NOT castrol R!!

Pops

A C F Howells in Walsall for plating but I guess it depends where you are.

Paint

as you live in Norfolk aerocoat is a good bet ive had lots done they are just near gt Yarmouth

Just had my H1D done on the Kessingland industrial estate. Very good job but lengthy wait.

I always get my bikes powder coated it looks like new wears well and you can get various finishes the purists go for paint like the factory in fact if you want to be real authentic why not go for the original paint on bare metal in fact leave it after you blast it so you get a bit of rust it will give you something to do every winter strip it it down and re paint it. No brainier powder coating I have a guy in Glasgow does all my bikes he knows what parts to mask ect do not get someone who does industrial powder coating as a mate thought he was doing me a favour getting one of his customers to do it for me the guy was so busy I had to get the bits blasted and then he coated them 2 weeks later the finish was like a rattle can and guess what rust started coming through after a few months always get a recommendation from someone and if possible examine their previous work.

We always blast the frames to bare metal, treat any rust areas to prevent re-rusting, rub down and/or fill any areas where pitted with a special high temperature filler and coat any colour you want. Ask your powder coater if he does all these when coating your frame, i very much doubt it.
Phil

Klawsuc wrote:We always blast the frames to bare metal, treat any rust areas to prevent re-rusting, rub down and/or fill any areas where pitted with a special high temperature filler and coat any colour you want. Ask your powder coater if he does all these when coating your frame, i very much doubt it.
Phil

That sounds good Phil, pity you're so far away. Do you collect ?

Can you do this one Phil!

Now your taking the piss Malc

Well it did say they could treat any rust areas Rog

Klawsuc wrote:We always blast the frames to bare metal, treat any rust areas to prevent re-rusting, rub down and/or fill any areas where pitted with a special high temperature filler and coat any colour you want. Ask your powder coater if he does all these when coating your frame, i very much doubt it.
Phil

Don't know if he does this Ill ask him he's being doing Bikes for me for over 20 years never had a problem with any of his work.

I'll just check to see if we have that colour brown malc. What are those small black areas?

Sorry lads i can't collect.

Thanks guys I'm going for powder coat, I've spoken to Phil