Page 1 of 1

H1B

Posted: Sun Jan 28, 2018 3:16 pm
by buckosbikes
Hi all. Just joined the club. I've just bought a H1b which had been sitting in a shed for years. Have had it running, after checking the bores and cleaning out the carbs. After several kicks it ran and sounded good. The previous owner told me he thought it was sold from baycover in lowestoft when new. Any info would be appreciated. Thanks.

Re: H1B

Posted: Sun Jan 28, 2018 4:07 pm
by SAM
UK bike
25/9/1973
And it's blue!

Re: H1B

Posted: Sun Jan 28, 2018 5:01 pm
by malc87
Looks like it has all the correct parts on it Thumbs Up

Re: H1B

Posted: Sun Jan 28, 2018 7:27 pm
by Triple Parts
Great find Thumbs Up

Re: H1B

Posted: Sun Jan 28, 2018 8:52 pm
by Nick64
Welcome to the club. Nice bike.

Re: H1B

Posted: Mon Jan 29, 2018 1:24 am
by Nigel S
Welcome to the club.

Possibly sold from Lowestoft Kawasaki, but not Baycover. Peter Smith whok ran Lowestoft Kawasaki opened his own shop where Baycover is now in 1978 ish. He went into partnership with Terry who owned all the triples in Baycover.

I originally owned one of the last H2C,s that came out of Kawasakii Lowestoft that was KRT 903 P.

NICE BIKE and great find Thumbs Up

Re: H1B

Posted: Mon Jan 29, 2018 7:56 am
by downpipe3
nice
if you need crankshaft give me a shout Thumbs Up

Re: H1B

Posted: Thu Feb 08, 2018 10:19 pm
by robh1f
WOW good find !!! .....like a few UK "b"s its on a M plate as the newer models came in and they got left on the showroom floor?? If you are doing a proper resto I have NOS clocks and iggy switch as well as other small parts so let me know. Good luck mate Thumbs Up Thumbs Up

Re: H1B

Posted: Fri Feb 09, 2018 10:10 am
by Olde Coney
Welcome to the asylum :)

Re: H1B

Posted: Sat Feb 10, 2018 5:41 am
by scouse
malc87 wrote:Looks like it has all the correct parts on it Thumbs Up
Interesting as my B came to me with a solid master cylinder as well
Gary T

Re: H1B

Posted: Sat Feb 10, 2018 5:53 am
by scouse
Welcome, I also own a UK H1B

Gary T

Re: H1B

Posted: Sat Feb 10, 2018 9:04 pm
by buckosbikes
Thanks for the replies. I'm finishing off my gpz900 first before i make a start on it. I'm not doing a full nut and bolt resto on it but still want it to look nice. No doubt i'll be asking for advice and parts as i go on.
Thanks again