Page 1 of 1
Decal position
Posted: Tue Mar 13, 2018 3:45 pm
by BudgieZ1
Could anyone supply a picture of the exact position I should place a chain-oiler decal on an H2C? Thanks in advance, Steve Burgess
Re: Decal position
Posted: Tue Mar 13, 2018 4:04 pm
by stevie747
I don't think decals have 'exact' positions anywhere. Presumably they were hand applied and therefore can vary in position, however by 75 they may have found a template to use. I've certainly never seen any judges at rallys with a ruler
It's roughly applied here, just make sure it's the right way up :wink:
Re: Decal position
Posted: Tue Mar 13, 2018 4:37 pm
by BudgieZ1
That's great Steve - thanks very much indeed!
Steve Burgess
Re: Decal position
Posted: Tue Mar 13, 2018 9:07 pm
by Madmax
but your split pins the wrong way round.
Re: Decal position
Posted: Thu Mar 15, 2018 9:07 pm
by stevie747
bugger, there goes the rivett counter
Re: Decal position
Posted: Fri Mar 16, 2018 8:44 am
by stevie747
BTW, the pic shows an H2/A, the C has a different decal, so double check before applying.
Re: Decal position
Posted: Fri Mar 16, 2018 11:39 pm
by Bill
stevie747 wrote:bugger, there goes the rivett counter
Rivet only has one t...
Re: Decal position
Posted: Sat Mar 17, 2018 8:12 am
by g6mow
