FERODO CLUTCH PLATES
Posted: Thu Mar 29, 2018 7:03 pm
FERODO do clutch plates for all the triples, but they also do `high performance` plates for the H1-KH500 they say
these plates grip better ( less clutch slip).
The H1 plates will also fit the H2 clutch but you will need to cut down the lugs on one plate to fit
under the reinforcing ring.
If any of you are having a clutch slip problem on your H1 or H2 the HP plates may be worth a try.
PART NUMBERS.
STANDARD TYPE PLATES.
250/350-----FCD0410
400-----------FCD0444
500-----------FCD0485
HIGH PERFORMANCE PLATES.
500-----------FCD0485/1
Ferodo say soak the plates in oil for at least 2 hours before fitting.
Also there is a set sequence to install the `HP`plates.
You can down load their (800 page) Motorcycle catalogue from here.
http://www.ferodoracing.com/catalogue/download-pdf/
these plates grip better ( less clutch slip).
The H1 plates will also fit the H2 clutch but you will need to cut down the lugs on one plate to fit
under the reinforcing ring.
If any of you are having a clutch slip problem on your H1 or H2 the HP plates may be worth a try.
PART NUMBERS.
STANDARD TYPE PLATES.
250/350-----FCD0410
400-----------FCD0444
500-----------FCD0485
HIGH PERFORMANCE PLATES.
500-----------FCD0485/1
Ferodo say soak the plates in oil for at least 2 hours before fitting.
Also there is a set sequence to install the `HP`plates.
You can down load their (800 page) Motorcycle catalogue from here.
http://www.ferodoracing.com/catalogue/download-pdf/