Kawasaki Triples Club

Hiya Guys, i have an H2b that started making a lot of gearbox noises, upon stripping it down, we found that the second gear output shaft and second gear drive shaft were all chewed up, part number 13130027 and 13131033 i believe, also the drum-gear change was broken at the end with the pins, does anyone have any advice where i may be able to source these parts, or does anyone have any spares? also does anyone know how the damage may have occurred? i wasnt riding it like i stole it
Thanks in advance Banjo

Don't know much about the H series myself but I daresay someone will be along who does. Bit quiet on here at the moment but we're slowly luring them back from Facebook.
37 views and no answers yet. Come along chaps!

Mitsui Spy wrote: ↑Mon Aug 23, 2021 11:15 pm Don't know much about the H series myself but I daresay someone will be along who does. Bit quiet on here at the moment but we're slowly luring them back from Facebook.
37 views and no answers yet. Come along chaps!

Thanks for your input James..

Heres the gears.
You could get them made in the UK at Nova but its not cheap.

I asked Bill Bristow what he thought after sending him your text on here via whatsapp and he said Possibly a broken circlip in the box? He said its alway hard to determine what went first in a blow up?

https://www.ebay.com/itm/230998435545?e ... Swwo1Xcoxa


https://www.ebay.com/itm/284418824583?h ... SwG21gWeZY

Good work Malc.
Am I right in thinking an H1 gear box cluster can also be used?

Ive found the drums and selectors to be the same too Graham even though they are different part numbers . One of the Selector forks is wider and that has to go on the far right with the engine upside down.
The FULL H1 box does fit no problem in a H2 and like you say you have to change the bearing next to the clutch for the H2 larger bearing.
You also have to put the gear of the H1 internal kickstart assembly on to the H2 internal kickstart assembly to work the H1 box.
Dave Higgs used a H1 box in his H2C back in 2010 with no issues and he DID know how to thrash a bike!!

Dave Higgs used a H1 box in his H2C back in 2010 with no issues and he DID know how to thrash a bike!!

What do you mean Malc he DID know how to thrash a bike, doesn`t he do it anymore.?

I think he has calmed down a little bit now
One of the fastest boys I have EVER rode with

malc87 wrote: ↑Tue Aug 24, 2021 3:41 pm I think he has calmed down a little bit now

You do know that he has just bought another MT09 SP?

Oh dear!

Right guys....thanks for all the input, i really do appreciate it, and the links as well, it gives me something to ponder over, hopefully it should be back on the road soon, i will keep you all updated...cheers

I have H1 gearboxs if you want to go down that route

malc87 wrote: ↑Tue Aug 24, 2021 6:35 pm I have H1 gearboxs if you want to go down that route

Cheers Malc, thanks very much for the offer, i am gonna have a think about it, and see which is the best way to go...not sure at the moment.
but ta very much..