Page 1 of 1
New member - Vic
Posted: Wed Feb 21, 2024 1:08 am
by Vic Wikarczuk
Hi all
I'm new here, just joined recently.
Here is my new project which I'm going to bring to formal glory.
h1.jpg
Re: New member - Vic
Posted: Wed Feb 21, 2024 7:51 am
by Olde Coney
welcome to the asylum, looks like you've got yourwork cut out there, keep us posted with your progress
Re: New member - Vic
Posted: Wed Feb 21, 2024 8:00 am
by Triple Parts
Welcome Vic, a bit of polishing to do there

Re: New member - Vic
Posted: Wed Feb 21, 2024 8:19 am
by SAM
I think that has the wrong bolt on the forks!
Re: New member - Vic
Posted: Wed Feb 21, 2024 11:02 am
by skub
A couple of days with the Solvol and it'll be fine.
Welcome in Vic.
Re: New member - Vic
Posted: Wed Feb 21, 2024 1:43 pm
by robh1f
Welcome in Vic.....feel free to ask for parts you might need......you never know

All the best Rob.
Re: New member - Vic
Posted: Wed Feb 21, 2024 6:15 pm
by Wolfie
You'll know a fair bit about triples by the time you finish that one Vic...
Even hardened triplers would have their talents stretched... Welcome
Re: New member - Vic
Posted: Wed Feb 21, 2024 8:00 pm
by TallyB
Great club, lots of info and loads of piss taking. Who could ask for more.
Welcome.

Re: New member - Vic
Posted: Thu Feb 22, 2024 6:57 am
by GWB
Yes welcome Vic, you have your work cut out there

, please keep us all posted when you can

Re: New member - Vic
Posted: Fri Feb 23, 2024 9:09 am
by malc87
Welcome Vic, tell us a bit more about the bike
