Tightening torque for engine sprocket on a KH400 A4
Posted: Sun Mar 10, 2024 4:07 pm
Can anybody please advise me of the recommended tightening torque for the engine sprocket nut on my Kawasaki KH400 A4 model. Thanks.
Kawasaki Triples Club
https://forum.kawasakitriplesclub.com/
Tightening torque for engine sprocket on a KH400 A4
Page 1 of 1
Re: Tightening torque for engine sprocket on a KH400 A4
Posted: Sun Mar 10, 2024 6:04 pm
Re: Tightening torque for engine sprocket on a KH400 A4
Posted: Tue Mar 12, 2024 3:26 pm
Thankyou mraxl - the table will be very helpful
Re: Tightening torque for engine sprocket on a KH400 A4
Posted: Sun Mar 17, 2024 11:44 am
Easiest thing to do is dab a bit of loctite on the tread
The nut is only there to stop the sprocket working loose, which it can do ( it's quite common for it to happen on a triple)
Hope this helps
The nut is only there to stop the sprocket working loose, which it can do ( it's quite common for it to happen on a triple)
Hope this helps
Re: Tightening torque for engine sprocket on a KH400 A4
Posted: Sun Mar 17, 2024 12:06 pm
...and tab washer is correctly fitted.
Re: Tightening torque for engine sprocket on a KH400 A4
Posted: Tue Mar 26, 2024 5:36 pm
red loctite on 