Fork Damper Tool

[Triple Parts]

There is an allen head screw in the bottom of the fork leg that fixes the damper Fork Damper Nut and when undoing or tightening, it often just spins.

Kawasaki specified a special tool to clamp the damper nut inside the fork, but a cheap 6 sided 14mm socket squashed slightly on 2 sides with a couple of long 3/8 extension bars will do the same job.

Fork Damper Nut - 6 sided 14mm socket squashed slightly on 2 sides.jpg

Fork Damper Nut - 6 sided 14mm socket squashed slightly on 2 sides 2.jpg