Sprocket nut
Posted: Sun Oct 27, 2024 12:46 pm
Hi all, does anyone know the socket size that fits the front sprocket nut of a s3a
Page 1 of 1
Re: Sprocket nut
Posted: Sun Oct 27, 2024 3:33 pm
27mm
Re: Sprocket nut
Posted: Sun Oct 27, 2024 3:35 pm
It should be 27mm AF unless it happens to have been fitted with a later 32mm nut.
Re: Sprocket nut
Posted: Sun Oct 27, 2024 3:35 pm
Ah, Wolfie beat me to it 
Re: Sprocket nut
Posted: Mon Oct 28, 2024 11:32 am
Always as one with the washer on your tools just in case 
Re: Sprocket nut
Posted: Mon Oct 28, 2024 5:02 pm
Oddly enough James, I had it in mind that it was 32mm as I bought a 32mm Socket at the Autojumble on Saturday...
When I came to answer the question however, I thought it looked too big so actually measured the nut at 27mm, I am sure the socket will fit the Clutch centre nut also though.
When I came to answer the question however, I thought it looked too big so actually measured the nut at 27mm, I am sure the socket will fit the Clutch centre nut also though.
Re: Sprocket nut
Posted: Tue Oct 29, 2024 6:08 am
Wolfie wrote: ↑Mon Oct 28, 2024 5:02 pm Oddly enough James, I had it in mind that it was 32mm as I bought a 32mm Socket at the Autojumble on Saturday...
When I came to answer the question however, I thought it looked too big so actually measured the nut at 27mm, I am sure the socket will fit the Clutch centre nut also though.
The 27 mm nut is the same for H series clutches as the sprocket nut
Re: Sprocket nut
Posted: Tue Oct 29, 2024 12:34 pm
Well that's 2quid down the swannee then..