Kawasaki Triples Club

Are replacement rubbers available for the hydraulic steering damper?

I don't think anyone knows doodah. I'm looking for the same things for mine. I haven't looked too hard at the moment. However the inserts for Hagons might fit? I'll have a deeper online look when I need them. If I come up trumps I'll let you know. Likewise with you if you get there first

Regards

Well Mike, due to the lake of responses I assumed that they are not available. So I had a go at making my own. using the H1 sidestand damper rubber as that was the closest thing dimensionally that I could find. Using a Dremel sanding attachment I took down the OD, then cut it to length. Now I can't find where I put my 11mm drill bit to bore out the centre.

Are they the sam as the shock bottom mount rubbers?

If you can give me the dimensons, I should be able to find something. This is for a 10mm bolt...

Thanks for trying. I'ts great to se a supplier trying to help out. If you have some success please let me know. I shall try auto factors locally. It might be the same rubber insert as in a tailgate closer. Im sure the company who makes the dampers make them for other motorcycle brands as standard fit.

regards

These are the dimensions 12mm id, 16.5 length, 15.5mm od in centre of vee, 17.5 od at ends of vee

I see that the modern NHK dampers now have rose joints as opposed to rubbers