Kawasaki Triples Club

Hi all, help needed please. I’ve filled the oil tank up and bleed through to pump. I’ve put a small drill on the pump and rev it clockwise and anti clockwise but no oil enters the 3 oil lines coming from the pump, the engine banjo’s are open to prevent air lock. Do I need to bleed the oil pump by opening the banjo’s bolts on the pump before it pumps into the oil lines ???
Looking forward to some advice

Cheers Mike

You don't need to open the banjo’s bolts, and I've never had to use a drill.
I just manually hold the quadrant fully open and rev the engine, you should see the oil coming through fairly quickly.

Cheers and thank you.
Mike