Kawasaki Triples Club

Hi all, if I drain all the petrol from my float bowls on my 1975 S3a, the floats lower so much that the float valves fall out and land in the bottom of the float bowls, surely this shouldn't happen, and before you ask, yes the floats are set to the correct height and the bike runs just great, has anyone experienced the same?

Thats a new one to me

Hi

Some of the after market float values are slightly shorter than the original ones , hence they fall out when the carb is totally empty

all the best

Tango

Are you measuring float height or fuel height? I've found an appreciable difference between the two in the past... viewtopic.php?t=18210

Just done mine (again) today. Trust the last one (of the 3) to be a bit of a pain to get right!