Kawasaki Triples Club

I bought a new h2 stator from rex speed shop, spent all morning trying to get the old bugger out,finaly, got it out, cleaned up the casing to fit the new one, the bastard does not fit!!!!, the coils are to big and jam on the casing, no way will this go in without damaging the coils, called, no answer, sent an email, waiting for someone to call me,hope fully another can be sent as this one is useless, and im running out of time for the southern

Andrew,
will be in Concarneau in August.
Can take with me a whole H2 left iggy stator which works; you could give me back later in Xmas for exemple

perhaps Jp, Rex speedshop after sales service, is terrible, you cannot call them, no answer,the coils of the new stator are to big, it cannot be fitted,they do not accept this, fecking terrible service

okay here are the measurements,diameters, the casing in which the stator sits is 140mm and seats on128mm where it screws on, the outer measurement between original coils is 122mm exactly, all coils, giving 6mm clearance to fit, 3mm both sides.

Rex stator, 2x2 sets coils is 125mm, thats okay, but the outside measurement between coil 5 and 6, two opposite each other, is 129mm, 129mm does not fit into a 128mm hole,no clearance, I tried it in a second casing does not fit, their answer, send it and the casing, at my cost, where they will fit it, fecking fat chance at hourly rate, and send it back to me, at my cost, well get fecked, the measurements say it all, they cannot admit its wrong, its my 400 euro mistake, service is terrible, not spoken to anyone, just smartarse answers as to how as stator works, how brilliant they are and im a dick

I dont hold out much hope that they will do anything about this, as a last resort,I suppose i could take a file to the casing to make the fecker fit

thats why it does not fit!!

You're not the first to have this trouble, Alloallo had the same issue with them.
He fitted my 71 H2 stator (the whole iggy) to go to 50 years anniversary of H2 on 2022.

Say me if I take one for you Andrew

I bought one from them a few years ago when I think they had just released the new windings set with no exchange required, I bought it more for insurance against breaking down than any running fault and it must have fitted straight in as I dont remember having any issues

I wonder if there is some difference between the size of the stator 'case' over the years?

I have just sent it back, along with my casing, to prove it does not fit,and under warranty, supply a replacement, and ensure it fits the undamaged, circular casing, They do not answer the phone, tried calling for three days, sent pictures, since the last ones, they dont reply at all, sent a contact us form today, no reply, I am hoping they send back another stator and my casing back, if not who lives near Robertsbridge, that can go bang their door???

Do me a favour someone, try calling them on 01580 880 768, and see if its my phone is the problem, or they just dont answer

I did get through to them on another matter and the girl who answered very reluctantly handed over the phone to a Male who seemed to know what he was talking about but also wasnt in the queue when they were handing out both manners and conversation skills

Tilly H2C wrote: ↑Mon Jul 27, 2026 9:56 am I bought one from them a few years ago when I think they had just released the new windings set with no exchange required, I bought it more for insurance against breaking down than any running fault and it must have fitted straight in as I dont remember having any issues

I wonder if there is some difference between the size of the stator 'case' over the years?

nope I only remember that the iggy cover of later HI E F and KH 500 won't fit with the 3 pick up iggy unless it's the iggy cover with Kawasaki marked on it (all H2 and H1D) which don't fit with the 2 pick up iggy

Jp, merci I wait for rex to return, see you soon

I would take a H2 iggy with me just in case

That`s odd ? I got one of their first ones made earlier this year. And it fitted fine........... No help for you , of course !!!

Luck of the draw Neil, it should be delivered today, lets see how it goes

Sorry to hear your troubles Andrew. I have just installed one and like Neil it fitted fine. Not on the bike yet though.
Let us know the outcome as I am intrigued to what is wrong.

Nigel, the answer is in the pictures, two coils were to big to fit in the casing,the aftersales service is terrible, they do not answer the phone,emailing pictures showing the problem replys like, how a stator works, you will have to heat up the casing, your casing is damaged,they are a tight fit,I gave up with the email dance, and posted it back to them, then,after they recieved it, silence, zilch, zero, until today, notification of post from speedshop,has been posted,this will be interesting, as i marked my casing and the stator with small ind pen, and hopefully not get humped on customs twice, plus the cost of posting back to them,

my guess, is that they state every stator, checked in a casing before shipping, that they check the mounting plate fits before assembly of the coils,and not after assembly, because this one will not, could never fit, without forcing it and damaging the two coils, warranty gone!!

Now, no one is perfect, mistakes can and will be made, will see if its the same stator forced into the casing, and coils touching the casing with no clearance, if so, its going back, or its another stator fitted,with clearance to the coils

Andrew am in Brittany now with a whole H2 left iggy covers included, PM me if need.

husson73 wrote: ↑Thu Aug 06, 2026 3:21 pm Andrew am in Brittany now with a whole H2 left iggy covers included, PM me if need.

bonjour Jp, stator fitted and try to start engine today

A replacement stator was sent to me to relace the first one sent out that was not to spec, merci,Well, that went well,Not, stator fitted,dti out, timed the bike, checked pickup gaps, would the bugger start, no, have spark on all three, but a new problem has arrived, so, see technical

Glad you got it sorted Andrew. Couldn't understand it as mine fitted first time lovely.