Kawasaki Triples Club

Just had a run out on the H2c and when l got back l noticed 2 stroke oil all over the right hand side of my bike. On inspection found that the sightglass had unscrewed itself. Is this a common problem and how can l stop it happening again.

They usually stay put but put it in tighter next time.

or if yer worried, put some silicone sealer on there first, you'll have to degrease the threads and the window first or it'll not stick.

The information contained in Wolfie tips is for general information purposes only. The information is provided by [Wolfman inc] and while we endeavour to keep the information up to date and correct, we make no representations or warranties of any kind, express or implied, about the completeness, accuracy, reliability, suitability or availability with respect to the information, products, services, or related graphics contained in the information for any purpose. Any reliance you place on such information is therefore strictly at your own risk.

In no event will we be liable for any loss or damage including without limitation, indirect or consequential loss or damage, or any loss or damage whatsoever arising from loss of data or profits arising out of, or in connection with, the use of these tips.

Thanks, l think l might use the silicone to make sure.

NOTICED THE KH500 LOOKED OILY LAST WEEK & ALSO DISCOVERED GLASS JUST ABOUT TO FALL OUT!
DECIDED TO TAKE TANK OFF TO CLEAN UP SPILL & THEN DISCOVERED THAT ON TAKING OFF FILTER IT WAS FULL OF BLUE GUNG & HARDLY ANY FLOW. STROKE OF LUCK BEFORE RUNNING DRY! MIGHT HAVE BEEN USED TO SEAL GLASS?