Kawasaki Triples Club

Posted: **Tue Apr 20, 2010 6:41 pm**

Need a left caliper changed to a right hand one?????Mr Ritchie can you help????

Posted: **Tue Apr 20, 2010 7:06 pm**

Rob, i dont know which model you are working on ,but i thought you just took the mounting plate out and put it in back to front. Works for me on my kh400 special forks.
cheers
Higgsy

Posted: **Tue Apr 20, 2010 7:32 pm**

I don't know if you have to do this but the one on the right here has been machined to be used on the right hand side. This came off an H2.
The machining is simply the reducing of the mounting lug so its flush with the rest

Posted: **Tue Apr 20, 2010 8:20 pm**

Thanks for fast replies....should have been more precise!!! have got a new cnc bracket for the r/hand side but the caliper needs to have the inlet and bleed threads swapped so the bleed nipple faces forwards...remember a mate of ours did a twin disc conversion back in the 70's and just reshaped the pipe to feed from the front and bleed nipple out back......not a pretty sight.

Posted: **Tue Apr 20, 2010 8:54 pm**

remember a mate of ours did a twin disc conversion back in the 70's and just reshaped the pipe to feed from the front and bleed nipple out back......not a pretty sight.

You mean like this classy piece of work

Posted: **Wed Apr 21, 2010 5:38 pm**

Yes Malcolm just like that!!! Anyone know anyone who has done a "proper" job then?????

Posted: **Wed Apr 21, 2010 6:45 pm**

I don't know about machining, but adaptors should be readily avaiable from hydraulics suppliers

Posted: **Thu Apr 22, 2010 9:40 am**

robh1f wrote:Yes Malcolm just like that!!! Anyone know anyone who has done a "proper" job then?????

me

Posted: **Thu Apr 22, 2010 12:03 pm**

666rog wrote:
robh1f wrote:Yes Malcolm just like that!!! Anyone know anyone who has done a "proper" job then?????
me

Smart arse!

Posted: **Thu Apr 22, 2010 7:36 pm**

Rog Nick thought it was you but could not remember!! Went to see him this morning to pick up ££££ and bits for the 70 and we "found" one .....did you do it for him????BTW love the concise answer!!!...will drop Malcs cases off to you next Friday. Cheers Bobby.

Posted: **Fri Apr 23, 2010 8:24 am**

Dear God. I only done that caliper for Nick a couple of months back. He only has one mate who has machining facilities and he cant remember who done it?

What a nob

Posted: **Fri Apr 23, 2010 7:20 pm**

robh1f wrote:Rog Nick thought it was you but could not remember!! Went to see him this morning to pick up ££££ and bits for the 70 and we "found" one .....did you do it for him????BTW love the concise answer!!!...will drop Malcs cases off to you next Friday. Cheers Bobby.

Cheers for that Rob. Will catch up with you later mate.

Kawasaki Triples Club

Caliper machining

Caliper machining