Page 1 of 1
S.O.S
Posted: Thu Jun 24, 2010 10:27 am
by Gard
Anyone in the kingston area the weekend ?i would appriciate some help!. cannot get my h2 running right after having new z power carb kits fitted then finding their hopless and sending them back and finally fitting some brand new mikuni needles and jets it now starts fine when cold then after 5 miles revs up and down with no smoothness and gets worse and worse to allmost unridable..ive set the new needles at the middle and the new air screws are 1 and three quarter turns out..i was hoping to ride up to nott next week but its now 50% worse than ever...prob have got the can of worms now...pete.
Posted: Thu Jun 24, 2010 11:53 am
by the180kid
the only kingston i know is in Jamaca man,..
sure you got the cables routed correctly under the tank, so they move free...
Posted: Thu Jun 24, 2010 12:44 pm
by Wolfie
Kingston upon Hull or upon Thames? or Jamaica...
My guess is Thames.
Posted: Thu Jun 24, 2010 12:47 pm
by Wolfie
My other guess would be running too rich, air filter clogged or chokes not seating properly or back to your carb settings, too rich either way.
Posted: Sun Jul 11, 2010 5:56 pm
by H2Nick
Gard
Late reply as I was on hols when you posted.
I'm in Hampton - the carbs in mine run nicely from tickover to redline.
If you come over, we can swap stuff till it works.
PM me if this is still a prob for you
Posted: Sun Jul 11, 2010 11:03 pm
by nipper
sounds like ur sorted,but if ur still stuck pm me and we will sort it
