Page 1 of 1
Missing cooling fin
Posted: Sun Oct 07, 2012 7:29 pm
by H2 Tim
Hi guys,
My H2 has a missing part of a cooling fin! can anyone recommend a repairer before i get the whole lot vapour blasted prior to re assembly,
Ps i am down in the South
with thanks H2 Tim.
http://s1104.photobucket.com/albums/h33 ... =Image.jpg 
Posted: Sun Oct 07, 2012 7:30 pm
by bbb
Try Higgspeed, on here!
Posted: Sun Oct 07, 2012 8:02 pm
by H2 Tim
Thanks,
i guessed that his name would surface!My guys at Ironart are capable of the repairs however i feel a regular on this type of repair would be my best option.
Any more reviews would be great fully appreciated,
Thank you for your time and knowledge,
My best H2 Tim.
Posted: Sun Oct 07, 2012 8:37 pm
by Doctorpayday
Dr Higgs, very good clinical job, struggle to see the joint.
Get it cleaned in his magic apparatus and it will look even better.
Doc
Posted: Mon Oct 08, 2012 11:18 am
by 666rog
I visited Higgspeed some months back and was shown several cylinders and heads that had all been repaired after fin mis haps. Dave asked me to pick out any replaced fins i could spot. After much head scratching I realised they were all NOS components and Dave was having me on.
Alas no, every single one was a repair job and I could not find one iota of previous damage. Higgsy is the man on this stuff. Go elseware at your peril.
666Rog.
Posted: Mon Oct 08, 2012 4:47 pm
by malc87
Im just going to post a cylinder to Higgsy tomorrow for repair to broken fins :smt023
Posted: Mon Oct 08, 2012 5:17 pm
by Hal
malc87 wrote:Im just going to post a cylinder to Higgsy tomorrow for repair to broken fins :smt023
I hope the postman doesn't cause more fins to need repairing than you thought.
