Kawasaki Triples Club

I acquired this a few months ago but haven't really got around to doing much apart from sorting through what's there, what isn't and making lists of jobs to do and parts to find.

Finally made a concerted effort to get it under way yesterday and the frame and all the painted parts should be ready to go to the powder coater later in the week, after I get the frame repairs done.



I know I like a challenge but I can't help but wonder if this is going a bit far.



I'll try and keep this updated as it progresses but don't expect too much too soon.

Androu wrote:
I know I like a challenge but I can't help but wonder if this is going a bit far.

On the contrary Androu, I don't think that'll be going very far at all

Make a list of what you are missing and give me a call :smt023

.

easy fix, not finished

Well things have progressed a little. The frame and all the associated parts have been away to Romax in Stockton-on-Tees to be powder coated black. Turn around in 3 days, which is about normal for them. Excellent quality again and really friendly to deal with.



Spent a few hours this afternoon putting some of the parts back together. Swinging arm in, centre stand and side stand on, top and bottom yokes in and air box in place. One shock stripped, cleaned, polished, rebuilt and fitted. Starting to look a bit more like a bike than it did.




.

What a posh workshop!

The build has moved on a bit since we picked up the H1 though.

Looks like it's going to be another sparkler, up to your usual standard Androu :smt023

fieldsheer wrote:What a posh workshop!

The build has moved on a bit since we picked up the H1 though.

Hi Derek,

Yes, it's amazing what an injection of cash can make to the progress of a project.

You managed to make room in the garage yet? or is 1 still sleeping outside?

El Presidente wrote:After dealing with bikes all day . . every day . . . I have to commend you for the tidy "workshop" - but I am more curious as to what the medals are behind the gas tank

I would guess for running marathons :smt023

Androu wrote:

fieldsheer wrote:What a posh workshop!

The build has moved on a bit since we picked up the H1 though.

Hi Derek,

Yes, it's amazing what an injection of cash can make to the progress of a project.

You managed to make room in the garage yet? or is 1 still sleeping outside?

HaHa.

Its also amazing how plans go out the window once you have parted with funds

The H1 has been under cover since it arrived, no way would I have been allowed (or wanted) to leave it outside. If you remember those little letter puzzles with a square missing that is what it is like at the moment getting a bike out.
I keep putting of deciding which bike will go as they all get a reprieve after 'one last run'. I really need to part with two bikes to get things back to a sane level.

Any chance of a few build photos for the H1, Jackie has been nagging me to find out?

It's been a couple of weeks since the last update so here's a quick summary of progress.

Engine stripped and crank ready to hand over to Mr Clarke at the weekend for rebuild, crankcases etc ready for vapor blasting.

Rear wheel parts all restored and rebuilt and tyre ordered.

Box of parts sent to Quality Chrome in Hull.



Temporary paint set fitted.



Exhausts need some repairs then rechroming.

It's coming along ok.

my best fun bike was an s2,wish i had never sold it,bloody big fuel bill if you use one though

Well it's been a couple of months since the last update and things have gone a bit quiet but I've got my finger out over the past week and had a good afternoon at it today so I thought I'd share the progress.



The S2 workshop has become a bit cluttered today after collecting the 2014 project frame and bits and pieces from the powder coaters this morning. Engine on the bench ready for the rebored barells to be fitted.



New pistons fitted and barells on. Even remembered to fit the base gaskets this time. Frame protected ready for engine install.



Engine in and a few other bits bolted on.

Next update in a few weeks.

I love your garage it's almost like a kitchen i wish my garage was as clean as that ,and you don't even have to go far for a bacon buttie :smt023

Big thanks to Phil for a fantastic job on the paintset, especially considering what I handed him and also to Chris Todd for collecting it from the Southern Rally and bringing it back up North.

I have to say I'm over the moon with the look of the bike but really need to get the front wheel done.




.

Looks fantastic!.. :smt023

Looks Great love the white ! bit awkward at breakfast tho eh

Very nice & yet another job from Paint by Paint :smt023

Well the months have flown by and the S2 progress has been rather slow. Got the front end rebuilt but wasn't happy with the forks so decided to have a spare set of sliders re-hard chromed by Philpotts and the fork bottoms re-chromed by Quality Chrome in Hull.
Here are all the fork parts ready for re-assembly.



The forks in this photo are still the ones I'm not happy with, they look ok in the photo. Put the exhausts on to see how the bike looks almost complete but they need to come off, be repaired and re-chromed.



It's nearly there, a few more parts to acquire and hopefully ready for spring.



.

Looks absolutely superb another top job.
Can't wait to see it in the flesh at next years spring ride out

lovely job that is