RH switchgear

Any triple related issues, topics or stories then POST THEM HERE.......
Post Reply
thelodgers
Expert
Posts: 388
Joined: Thu May 04, 2006 12:52 pm
Location: Euxton, Lancs

RH switchgear

Post by thelodgers »

I've never really thought about my switchgear until today. I have a H1E with what I assume is US wiring as it doesn't have a side light. So the RH switch says.....ON-PO-OFF. I have two questions:

What does PO stand for ?

On my bike , when moving the switch to the left , i.e. from the off towards the on position, it falls into a detent opposite the PO position and does indeed put the dip/main light on. However it does feel like the knob could continue to be opposite the ON position but there is only what feels like spring pressure against it and no detent. It feels like a flasher would, although it doesn't flash or do anything else for that matter. So is the knob supposed to have 2 detent positions ( OFF and PO ) or 3 ( OFF , PO and ON ) ?

I don't have any problem with the lights so this query is for anoraks.

Many thanks

Nigel
Contents may settle !
BIG H
Expert
Posts: 1059
Joined: Thu May 04, 2006 12:52 pm
Location: SITTINGBOURNE,KENT.

Re: RH switchgear

Post by BIG H »

What does PO stand for ?

Some people say
PO = Position lights
others say PO = pilot lights
The choice is yours!
User avatar
Triple Parts
Expert
Posts: 6492
Joined: Fri May 12, 2006 11:00 am
Location: Lancashire Riviera
Contact:

Re: RH switchgear

Post by Triple Parts »

PO = Pilot On maybe?
FREE Triples downloads here... https://kawatriple.net/
Triples Parts here...https://kawasakitripleparts.com/
User avatar
Nick64
Expert
Posts: 1057
Joined: Thu May 04, 2006 12:52 pm
Location: Ilford Essex

Re: RH switchgear

Post by Nick64 »

I have always been puzzled by this.

Pilot On(ly) - but the wiring diagram has a city light - not a pilot light

Parking On - but the parking light function is controlled by ignition switch position rather than by the RH switchgear

The switch is arranged

OFF --- PO--- ON

So it could be "Partially On"

The Owner's Handbook doesn't tell you what it means - just what it does.

KZrider forum had a similar discussion - but no definitive answer http://kzrider.com/archive/viewthread.php?tid=20212
and another at http://www.kzrider.com/forum/4-electric ... ght-switch
KH400A4
My Dad told me "If it's stuck use a bigger hammer."
User avatar
Wolfie
Site Admin
Posts: 10593
Joined: Wed May 03, 2006 8:05 pm
Location: Back to West Yorks, but only just..
Contact:

Re: RH switchgear

Post by Wolfie »

Inside your switch one of the cable holders is longer and stops the lever from going further.

You can remove it, snip the link that connects the two positions (or separate the wires onto their own proper connection) and fit a sidelight for UK spec.

Then the important bit.. paint the PO white.
.
I used to be a werewolf, but I'm alright nooooowwwwwww!!
thelodgers
Expert
Posts: 388
Joined: Thu May 04, 2006 12:52 pm
Location: Euxton, Lancs

Re: RH switchgear

Post by thelodgers »

Wolfie

I presume your comment about painting the PO white, is for the MOT tester ?

Thanks
Contents may settle !
Barrie
Expert
Posts: 867
Joined: Thu May 04, 2006 12:52 pm
Location: Queenborough Kent U.K.

Re: RH switchgear

Post by Barrie »

It's for your benefit , nothing to do with MOT's
User avatar
Wolfie
Site Admin
Posts: 10593
Joined: Wed May 03, 2006 8:05 pm
Location: Back to West Yorks, but only just..
Contact:

Re: RH switchgear

Post by Wolfie »

That's right Nigel, I should have put a :D after the comment I suppose.
.
I used to be a werewolf, but I'm alright nooooowwwwwww!!
Post Reply