I thought I,d cut one of my old lines up and connect some serviceable checkvalves on it
This is what I ended up with...........
When I get some new springs and balls, I will bleed it up and hopefully it should not leak
H2b/c oil line
-
drayman
- Expert
- Posts: 371
- Joined: Wed Nov 07, 2007 12:04 pm
- Location: Southwold, Suffolk.
H2b/c oil line
After having a centre oil line checkvalve fail this summer on my H2c, and costing me a small fortune
I thought I,d cut one of my old lines up and connect some serviceable checkvalves on it
This is what I ended up with...........
When I get some new springs and balls, I will bleed it up and hopefully it should not leak
I thought I,d cut one of my old lines up and connect some serviceable checkvalves on it
This is what I ended up with...........
When I get some new springs and balls, I will bleed it up and hopefully it should not leak
-
Nigel S
- Expert
- Posts: 2123
- Joined: Wed Sep 17, 2008 9:54 am
- Location: Lowestoft
-
SAM
- Expert
- Posts: 9442
- Joined: Wed May 03, 2006 8:05 pm
- Location: BIG SHED IN A NICE VILLAGE WITH A GOOD LOCAL. BEDFORDSHIRE
-
Neilbridges
- Expert
- Posts: 109
- Joined: Thu May 04, 2006 12:52 pm
- Location: Boscastle Cornwall
Re: H2b/c oil line
Great work!
-
Wolfie
- Site Admin
- Posts: 10593
- Joined: Wed May 03, 2006 8:05 pm
- Location: Back to West Yorks, but only just..
- Contact:
Re: H2b/c oil line
This was my own repair a couple of years back, the one on the right had a piece of hydraulic pipe fitted into the banjo, the original pipe was then inserted and glued inside the hydraulic pipe.
You do not have the required permissions to view the files attached to this post.
.
I used to be a werewolf, but I'm alright nooooowwwwwww!!
I used to be a werewolf, but I'm alright nooooowwwwwww!!