Chris Todd

Any triple related issues, topics or stories then POST THEM HERE.......
User avatar
Nick64
Expert
Posts: 1057
Joined: Thu May 04, 2006 12:52 pm
Location: Ilford Essex

Re: Chris Todd

Post by Nick64 »

bit more zincing today neutral light switch and oil pump
Good work they look like new.
Have you done this before or did they come out this good on your first attempt?
KH400A4
My Dad told me "If it's stuck use a bigger hammer."
BBP
Posts: 28
Joined: Tue Feb 03, 2015 9:42 pm
Location: USA

Re: Chris Todd

Post by BBP »

Thats Really Pretty Chris..........nothing like putting the fresh crankcase together and all the bits on the bike, all that scraping, cleaning, grinding and painting finally pays off.........nice and shiney :D

WTF... :roll:........7/11 with tumbleweeds...........I lived in Dallas, headqaurters of the Southland Corporartion..........thats right, the owners of 7/11 :cry:

What was Qaddafi's Biggest Threat :?: :?: :?:

He was gonna recall all the 7/11 managers

Yeh, I know thats terrible (but that was joke of the time in Big D)........anyways, Happy New Years

THX Phil :mrgreen:
Chris Todd
Expert
Posts: 971
Joined: Wed May 03, 2006 8:05 pm
Location: Northumberland

Re: Chris Todd

Post by Chris Todd »

Done quite a bit of zincing Nick once you sus out the correct current setting and time to leave in the tank I have had good results struggled with the yellow passivating which kept rubbing off now I dip in caustic soda which removes any oil .
Thought I would rebuild the carbs today loads of white residue in the float bowls ,the blaster sorted that :D changed the mains from 90's to 100's on Gary's recommendation as I am not running the UK air silencer and would think finding one will be virtually impossible. Made some new carb top gaskets from and old inner tube as old ones were like concrete :shock: .Quite pleased with the results :D :D :D
Image
Image
User avatar
TallyB
Expert
Posts: 2187
Joined: Wed May 03, 2006 8:05 pm
Location: Larne. Northern Ireland

Re: Chris Todd

Post by TallyB »

Looks real nice Chris. Thumbs Up
There is no such thing as bad drink, just some better than others.
Chris Todd
Expert
Posts: 971
Joined: Wed May 03, 2006 8:05 pm
Location: Northumberland

Re: Chris Todd

Post by Chris Todd »

Sorry Henry just read the post again and seen your question it is a gateros plating kit
http://www.gaterosplating.co.uk/
blackhat400
Expert
Posts: 779
Joined: Thu May 04, 2006 12:52 pm
Location: angus Scotland

Re: Chris Todd

Post by blackhat400 »

It will be a show winner 8) , if I know you Cris, . I dig the car sized coils, and 1 under the seat, is this the middle pot, ?
Chris Todd
Expert
Posts: 971
Joined: Wed May 03, 2006 8:05 pm
Location: Northumberland

Re: Chris Todd

Post by Chris Todd »

Nice to here from you John are you well? she is a uk model with points ignition motha K mounted the coil for middle pot under the seat
Chris Todd
Expert
Posts: 971
Joined: Wed May 03, 2006 8:05 pm
Location: Northumberland

Re: Chris Todd

Post by Chris Todd »

To cold to go in the shed today ,so I thought I would build the front wheel of my F6 which has been on the back burner for a while :oops: :oops: :oops: :oops:
Image
Image
Image
Image
Chris Todd
Expert
Posts: 971
Joined: Wed May 03, 2006 8:05 pm
Location: Northumberland

Re: Chris Todd

Post by Chris Todd »

Shiny bits coming thick and fast. big thanks to Richard the Masta fantastic quality as usual Thumbs Up Thumbs Up Thumbs Up
Image
Image
Image
Image
Post Reply