H1B Spotted Poynton Manchester

[steveh1d]

Was working up in Manchester yesterday and an H1B went past about 12:45.

Who are you? Hope you didn't get caught in the hail storm.

[Neil the Don]

Was it deffo a B ? There is a C that is a regular runaround in N. Mancland.

[malc87]

Might be Petearis on the board?

[steveh1d]

Was it deffo a B ? There is a C that is a regular runaround in N. Mancland.

Could have been, I didn't get a good look, only that it was orange and looked like a B. My knowledge of triple identification usually runs to the colour scheme, other than a D has different fork ears, narrow front mudguard and grease nipple on the rear hub brake spindle ....... I think

[Neil the Don]

Was it deffo a B ? There is a C that is a regular runaround in N. Mancland.

Could have been, I didn't get a good look, only that it was orange and looked like a B. My knowledge of triple identification usually runs to the colour scheme, other than a D has different fork ears, narrow front mudguard and grease nipple on the rear hub brake spindle ....... I think

Well. on a moving D I suspect the black and white pinstripe on the tailpiece would be easiest way to spot it versus an E ? !!

But if we start playing the spot the D differences, then there is another " extra" grease nipple, the seat lock, the clock faces, the Kawasaki loged "points" cover etc etc !!


I`m not sure Pete Aris has his B on the road yet tho`, Malc ?

[petearis]

Not me; sold my H1b to Simon Lister a few years ago.

There are few in Poynton who consider themselves Mancunians, I think

Pete

[El Presidente]

Well. on a moving D I suspect the black and white pinstripe on the tailpiece would be easiest way to spot it versus an E ? !!

But if we start playing the spot the D differences, then there is another " extra" grease nipple, the seat lock, the clock faces, the Kawasaki loged "points" cover etc etc !!


I`m not sure Pete Aris has his B on the road yet tho`, Malc ?

.

Well, if we are REALLY looking closely then the early h1d has the typo errors on the VIN tag . . . hard to spot at 30 MPH though

[Neil the Don]

Well. on a moving D I suspect the black and white pinstripe on the tailpiece would be easiest way to spot it versus an E ? !!

But if we start playing the spot the D differences, then there is another " extra" grease nipple, the seat lock, the clock faces, the Kawasaki loged "points" cover etc etc !!


I`m not sure Pete Aris has his B on the road yet tho`, Malc ?

.

Well, if we are REALLY looking closely then the early h1d has the typo errors on the VIN tag . . . hard to spot at 30 MPH though

YAAASSS !!!!! Trainspotters Nirvana. Anyone want to hazard a guess on the additional gease nipple locations ??

[johnnymoped]

Well - there is one on the swinging arm - can't think of another though

[nutboltman1]

Rear brake arm has a grease nipple

[Neil the Don]

There`s another one.........................................

[Triple Parts]

.....

[Peter Mac]

NIPPLES !!

[Neil the Don]

I`m getting my own back for all the Knobs at Shows that pick faults in some omy sale bikes !!!

( Completely missing the point that they`re not resotred , just roadworthy, and HALF the price of a restored bike !!! )


So come on , one of you must know if there is another grease nipple on a D ??

[steveh1d]

There`s another one.........................................

Well I bloody started something here didn't I. Just been out in the garage with a torch and can't find the 3rd nipple. I do have a vague recollection of there possibly being one behind the gearbox sprocket, or did I dream that?

You will have to put us out of our misery soon Neil.

[Neil the Don]

There`s another one.........................................

Well I bloody started something here didn't I. Just been out in the garage with a torch and can't find the 3rd nipple. I do have a vague recollection of there possibly being one behind the gearbox sprocket, or did I dream that?

You will have to put us out of our misery soon Neil.

You're close !! It's not on them all of course. Just the earlier ones , not sure up to what numbers but anything before H1F-6000 should have it fitted...........