Steering lock

[Lucky7]

Ok guys me again
I'll make it quick I'm having my bottom yoke powder coated and I need to get the steering lock out I've managed to get the lock itself out but does inner housing come out ? Also the lock has a number on it will I be able to get a key for it ? If so where do I look please
Last question where's the best place to get a set of wheels refurbished, new spokes polished hubs etc please

Thanks guy's

[Kezsam1]

For a key you need Malcolm he's on here as Malcolm and I'm sure will be along in a while for your wheels you need another Malcolm on here as mal71 take a look in services section
Both top blokes

[Nigel S]

As above for the key.
Wheels
Chroming -I used quality chrome in hull for all my chrome, even exhausts.
Spokes - Z power. Greens of beccles for lacing.
Polishing I use Phil Pearson in Belton.

[mal71]

Hi.
I am doing wheel building, I am in West London.
If you pm me with details of what you want, I can give you a price.

Cheers Malcolm

[Malcolm]

I need to get the steering lock out I've managed to get the lock itself out but does inner housing come out ? Also the lock has a number on it will I be able to get a key for it ? If so where do I look

Key number is on the face of the cylinder. Here's some pics of how I removed one on an H2B project a few years ago. If you know the key number pm me and I can sort you a key. If you don't have the number let me know and I can sort it if you send me the yoke with the lock in. The final pic shows all that comes out, the cylinder doesn't come out of the barrel, well at least not for this purpose.
N.B. This is a PATIENT DELICATE JOB, if you hurry or use force you WILL snap the key in the cylinder

This barrel was seized solid into the bottom yoke and the cylinder was seized in the barrel so to get it out had to be a two stage process.
I freed off the cylinder after a couple of days of WD40 and then a little heat.
Then I went to work on the barrel which put up a lot more of a fight, but came out in the end and refurbished nicely.

[Lucky7]

Guys thank you all so much for the info

Malcolm I'll pm key number to you

Thanks again