Disc Pads
-
malc87
- Expert
- Posts: 13350
- Joined: Wed May 03, 2006 8:05 pm
- Location: Timperley,South Manchester
Re: Disc Pads
Hardwood 
I can supply it in the form of a tree but you will have to machine it yourself
I can supply it in the form of a tree but you will have to machine it yourself
-
Eric
- Expert
- Posts: 2689
- Joined: Wed Sep 17, 2008 9:54 am
- Location: Bridgend
Re: Disc Pads
Cheers 
-
Neil the Don
- Expert
- Posts: 2804
- Joined: Thu May 04, 2006 12:52 pm
- Location: West Yorkshire
Re: Disc Pads
The EBC standard pads should be fine for you Eric.
Avoid the sintered versions, as they are too hard by far.
This is assuming it is just the pads that are the weakness. If it still has original brake pipes they may be a fault too ?
Avoid the sintered versions, as they are too hard by far.
This is assuming it is just the pads that are the weakness. If it still has original brake pipes they may be a fault too ?
-
Eric
- Expert
- Posts: 2689
- Joined: Wed Sep 17, 2008 9:54 am
- Location: Bridgend
Re: Disc Pads
Looking to replace as well Neil along with the master cylinder.
-
ZeeRexxer
- Expert
- Posts: 104
- Joined: Fri Mar 20, 2015 4:23 pm
- Location: Cheshire
Re: Disc Pads
Try Dunlopads, blob on!