The Great exhaust debate

blackhat400 · Post by **blackhat400** » Mon Sep 14, 2009 5:33 pm

Thot i"d bring this subject up as the resto season is nigh,
My H2 has spannies on [denco syle] sound awsome"

. but are black, was considering chroming them , i"d like your apinion on that, also have a set of micron"s chrome [ believed to be off H1] Will they fit and sound as good. ?
And lastly does any body make pattern originals? .and the gibsons [spannies] - how do they sound ...? enuff food for thot

[/b]

Ståle · Post by **Ståle** » Mon Sep 14, 2009 6:13 pm

Never heard of H1 Microns, but I can't guarantee they weren't made. S series microns were available. I wouldn't put S series pipes on an H2 (if they are S series). Your bike, you decide.

If you want chrome, go for it.

Can you post pics of your pipes ?

kas750 · Post by **kas750** » Mon Sep 14, 2009 6:14 pm

very easy answer to all of the above questions.

click this link

www.higgspeed.com

TallyB · Post by **TallyB** » Mon Sep 14, 2009 6:42 pm

Just what I was thinking Kas.

scouse · Post by **scouse** » Mon Sep 14, 2009 6:59 pm

or if you don't mind a bit of welding (as they come as a kit)

you could fit a set of Leo/nev pipes

Gary T

Post by **Wolfie** » Mon Sep 14, 2009 7:45 pm

Careful Gary... Steptoe's is just round the corner...

blackhat400 · Post by **blackhat400** » Tue Sep 15, 2009 7:23 pm

[quote="ståle"]Never heard of H1 Microns, but I can't guarantee they weren't made. S series microns were available. I wouldn't put S series pipes on an H2 (if they are S series). Your bike, you decide.

Can you post pics of your pipes will post pics of them micron"s soon

Code: Select all

<a><img></a>

blackhat400 · Post by **blackhat400** » Tue Sep 15, 2009 7:31 pm

ståle wrote:Never heard of H1 Microns,

Can you post pics of your pipes ?

Hi just managed to post pics of bike , will photo microns and post tmoz,, i was told they were H1 microns ,, does say micron on them , that purple 750 in other post looks like my exhausts ,, i can weld " are they a kit . how mutch roughly ..? do i need to attach springs at barrels ?

blackhat400 · Post by **blackhat400** » Wed Sep 16, 2009 10:31 am

Can you post pics of your pipes ?[/quote]
Hi just managed to post pics of bike , will photo microns and post tmoz,, ?[/quote]

Ståle · Post by **Ståle** » Wed Sep 16, 2009 2:37 pm

I'd say those are S series.

husson73 · Post by **husson73** » Wed Sep 16, 2009 4:23 pm

ståle wrote:I'd say those are S series.

+1

g6mow · Post by **g6mow** » Wed Sep 16, 2009 4:58 pm

How much are they

simonh · Post by **simonh** » Wed Sep 16, 2009 7:17 pm

g6mow wrote:How much are they

you bloody whore si

blackhat400 · Post by **blackhat400** » Wed Sep 16, 2009 9:12 pm

g6mow wrote:How much are they

Hi si" i wud sell them . but their not as good as they look , they have small hole on inside of baffle area [ due to some twat not having correct spacer, Rubbing on spindle bolt]

so the two pipes require i patch welded on ,

simonh · Post by **simonh** » Fri Sep 18, 2009 6:25 pm

its quite common that, i wonder if it s when you fit them to a 400, so theyre in the wrong place???

Olde Coney · Post by **Olde Coney** » Fri Sep 18, 2009 8:21 pm

blackhat400 wrote:
g6mow wrote:How much are they

Hi si" i wud sell them . but their not as good as they look , they have small hole on inside of baffle area [ due to some twat not having correct spacer, Rubbing on spindle bolt]
so the two pipes require i patch welded on ,

Don't go thinking that he'll be put off that easy