Sprocket nut
-
Roy Hook
- Posts: 13
- Joined: Sun Jun 16, 2024 2:00 am
- Location: Bedfordshire
Sprocket nut
Hi all, does anyone know the socket size that fits the front sprocket nut of a s3a
-
Wolfie
- Site Admin
- Posts: 10492
- Joined: Wed May 03, 2006 8:05 pm
- Location: Back to West Yorks, but only just..
- Contact:
-
Mitsui Spy
- Expert
- Posts: 2972
- Joined: Wed Apr 18, 2007 12:39 am
- Location: Wakefield, West Yorks
Re: Sprocket nut
It should be 27mm AF unless it happens to have been fitted with a later 32mm nut.
-
Mitsui Spy
- Expert
- Posts: 2972
- Joined: Wed Apr 18, 2007 12:39 am
- Location: Wakefield, West Yorks
Re: Sprocket nut
Ah, Wolfie beat me to it 
-
husson73
- Expert
- Posts: 6345
- Joined: Thu Nov 16, 2006 9:27 am
- Location: PARIS FRANCE
Re: Sprocket nut
Always as one with the washer on your tools just in case 
WS Churchill "You were given the choice between war and dishonor. You chose dishonor, and you will have war"
-
Wolfie
- Site Admin
- Posts: 10492
- Joined: Wed May 03, 2006 8:05 pm
- Location: Back to West Yorks, but only just..
- Contact:
Re: Sprocket nut
Oddly enough James, I had it in mind that it was 32mm as I bought a 32mm Socket at the Autojumble on Saturday...
When I came to answer the question however, I thought it looked too big so actually measured the nut at 27mm, I am sure the socket will fit the Clutch centre nut also though.
When I came to answer the question however, I thought it looked too big so actually measured the nut at 27mm, I am sure the socket will fit the Clutch centre nut also though.
.
I used to be a werewolf, but I'm alright nooooowwwwwww!!
I used to be a werewolf, but I'm alright nooooowwwwwww!!
-
scouse
- Expert
- Posts: 4811
- Joined: Wed May 03, 2006 8:05 pm
- Location: Knottingley
Re: Sprocket nut
Wolfie wrote: ↑Mon Oct 28, 2024 5:02 pm Oddly enough James, I had it in mind that it was 32mm as I bought a 32mm Socket at the Autojumble on Saturday...
When I came to answer the question however, I thought it looked too big so actually measured the nut at 27mm, I am sure the socket will fit the Clutch centre nut also though.
The 27 mm nut is the same for H series clutches as the sprocket nut
Boffin in a coffin
-
Wolfie
- Site Admin
- Posts: 10492
- Joined: Wed May 03, 2006 8:05 pm
- Location: Back to West Yorks, but only just..
- Contact:
Re: Sprocket nut
Well that's 2quid down the swannee then..
.
I used to be a werewolf, but I'm alright nooooowwwwwww!!
I used to be a werewolf, but I'm alright nooooowwwwwww!!