Hydraulic Damper Rubbers

[doodah]

Are replacement rubbers available for the hydraulic steering damper?

[Mike Steer]

I don't think anyone knows doodah. I'm looking for the same things for mine. I haven't looked too hard at the moment. However the inserts for Hagons might fit? I'll have a deeper online look when I need them. If I come up trumps I'll let you know. Likewise with you if you get there first

Regards

[doodah]

Well Mike, due to the lake of responses I assumed that they are not available. So I had a go at making my own. using the H1 sidestand damper rubber as that was the closest thing dimensionally that I could find. Using a Dremel sanding attachment I took down the OD, then cut it to length. Now I can't find where I put my 11mm drill bit to bore out the centre.

[Triple Parts]

Are they the sam as the shock bottom mount rubbers?

[Triple Parts]

If you can give me the dimensons, I should be able to find something. This is for a 10mm bolt...

stock109327_3.jpg

[Mike Steer]

Thanks for trying. I'ts great to se a supplier trying to help out. If you have some success please let me know. I shall try auto factors locally. It might be the same rubber insert as in a tailgate closer. Im sure the company who makes the dampers make them for other motorcycle brands as standard fit.

regards

[doodah]

These are the dimensions 12mm id, 16.5 length, 15.5mm od in centre of vee, 17.5 od at ends of vee

[doodah]

I see that the modern NHK dampers now have rose joints as opposed to rubbers