Gudgeon Pin Puller

[Vernon Thornton]

Hi All.

Can anybody recommend a good gudgeon pin puller for an H2 please ?

Note : Not a tool to push the gudgeon pin out ( away from you ) - A tool to pull the pin out ( towards you ) viz .. https://www.amazon.com/Sports-Parts-Pis ... B003CJMNBU

Cheers,

Vernon Thornton.

[doodah]

https://www.ebay.co.uk/itm/286618801921 ... R9bFhIjEZg

[Tartan Triple]

just go round to the other side of the ramp, simples

[g6mow]

Just seen on FB.

[Vernon Thornton]

Thanks all for your responses

[Wolfie]

A long Bolt (+ nut) and a long socket can do the job, although not if the Cylinder next door is fitted.

The Bolt Head should be small enough to fit through the Piston but not the pin, rounding the head off a bit will give more clearance too.


Bolt goes in from the far side, through the Pin then through the Socket and the Nut goes on the end (with a washer). As it is tightened it pulls the Pin into the Socket.

[Doctorpayday]

Hi

As wolfing suggested, but use cylinder head bolt.

Doc