ULTRASONIC CLEANER UNIT @ ALDI STORES

GinaG · Post by **GinaG** » Thu Jan 14, 2010 5:30 pm

Hi Guys

Don't pay for expensive Ultrasonic Cleaning for your Carbs etc anymore!!

Hurry While stocks last, get to you local ALDI Store & £16.99 will buy you one.

I got 2 today One for me & One for Paint

Sorry Guys I can now confirm these units are SHIT & not big enough to get even a 250 carb in. They only run for a max of 90 secs & for a single carb you need at least 4 hours, sorry to get your hopes up

I have now taken back the two units &got me Dosh back

He Who Dares Wins!

Delboy

[/b]

SAM · Post by **SAM** » Thu Jan 14, 2010 6:39 pm

Did try last year. Sold out & our store will not re-order!
Have got another one great bit of equipment

Big Al · Post by **Big Al** » Thu Jan 14, 2010 8:05 pm

got one but (Simon H) as it

simonh · Post by **simonh** » Thu Jan 14, 2010 9:16 pm

you'll need a ultrasonic cleaner to clean it

GinaG · Post by **GinaG** » Fri Jan 15, 2010 6:25 pm

Garyb wrote:Del does it work ok ,I only ask cos someone said theres a few on the market that dont?

Dont Know ?

Malcolm · Post by **Malcolm** » Sun Jan 17, 2010 11:35 am

I got one, they work ,but only up to a point, they take ages to remove heavy grime

Post by **Wolfie** » Sun Jan 17, 2010 12:11 pm

Even professional ones do.

Ours works a treat, it saved me from condemning a perfectly good carb last year.

kas750 · Post by **kas750** » Sun Jan 17, 2010 12:21 pm

Makes me wonder whether you would be better spending more and getting something like this???
http://www.maplin.co.uk/Module.aspx?ModuleNo=261248

SAM · Post by **SAM** » Mon Jan 18, 2010 8:46 am

kas750 wrote:Makes me wonder whether you would be better spending more and getting something like this???
http://www.maplin.co.uk/Module.aspx?ModuleNo=261248

Thats what i have

. Even it struggles to take large items! Still experimenting with different mixtures?

Malcolm · Post by **Malcolm** » Mon Jan 18, 2010 9:01 am

Which mixture have you found to be most effective so far?

SAM · Post by **SAM** » Mon Jan 18, 2010 3:09 pm

Malcolm wrote:Which mixture have you found to be most effective so far?

Detergent for degreasing & a mix i was using to clean Alloy car wheels for Ali stuff.

Luke Sharp · Post by **Luke Sharp** » Tue Jan 19, 2010 9:20 am

SAM wrote:
kas750 wrote:Makes me wonder whether you would be better spending more and getting something like this???
http://www.maplin.co.uk/Module.aspx?ModuleNo=261248
Thats what i have . Even it struggles to take large items! Still experimenting with different mixtures?

Verbatin External Hard Drives??????

Do they do ultrasonic cleaning as well then?