my latest projet

Keith500 · Post by **Keith500** » Thu Oct 28, 2010 6:37 pm

here we go again

should keep me busy

kas750 · Post by **kas750** » Thu Oct 28, 2010 7:17 pm

Bit of T-cut and some dash dandy and jobs a good 'un.

Malcolm · Post by **Malcolm** » Thu Oct 28, 2010 7:44 pm

Oooh Err, bit of work there then

What the hell is dash dandy Adrian???

kas750 · Post by **kas750** » Thu Oct 28, 2010 7:57 pm

Malcolm wrote:
What the hell is dash dandy Adrian???

Giving away a secret here

http://www.smart-stuff.co.uk/autosmart- ... 1093-p.asp

Olde Coney · Post by **Olde Coney** » Thu Oct 28, 2010 9:29 pm

************STOP PRESS*********

Sales of Dash Dandy up by 73% overnight

Keith I'll be round, ya never know there could be a few bits that I need there

Keith500 · Post by **Keith500** » Thu Oct 28, 2010 9:54 pm

ha ha roger

hey aid you got an s2 rear light bracket spare

that is the only bit i need so i can get me powder coating done

kas750 · Post by **kas750** » Thu Oct 28, 2010 10:04 pm

Keith500 wrote:ha ha roger
hey aid you got an s2 rear light bracket spare that is the only bit i need so i can get me powder coating done

Err no..I thought i had a spare but it turned out to be for a zed when i dug it out, so higgsy used it on his baby H2...sorry

kas750 · Post by **kas750** » Thu Oct 28, 2010 10:05 pm

Whats the approx vin number keith???

Keith500 · Post by **Keith500** » Thu Oct 28, 2010 10:16 pm

bugger

Rubbadub · Post by **Rubbadub** » Thu Oct 28, 2010 10:31 pm

i got a spare bracket but not sure what its off, how can i tell?

Keith500 · Post by **Keith500** » Thu Oct 28, 2010 11:14 pm

from what i can gather it is the distance from the top mounting holes to the bottom mount it is about an inch longer than the longest of the 4 different ones i have

if you could measure the distance between centres
that be the way forward, i will do that tomoz also it is triangle shaped on the top
many many thanks again
if there is anything h1 that you might need give me a shout if i have a spare you can have it

cheers

Keith500 · Post by **Keith500** » Fri Oct 29, 2010 9:44 am

95mm between the top and bottom centres when you draw a line between the top 2 fixing points

thanks

Keith500 · Post by **Keith500** » Fri Oct 29, 2010 9:45 am

april 72 the bike was made