Gauge Decals

Malcolm · Post by **Malcolm** » Sun Oct 30, 2011 6:54 pm

see here

http://www.kawtriple.com/mraxl/tips/met ... rresto.htm

Malcolm · Post by **Malcolm** » Sun Oct 30, 2011 7:14 pm

You need to get some scrap clocks to practise on first if you are going to give it a go. It isn't that difficult, but you do need a bit of practise first

kwackersken · Post by **kwackersken** » Sun Oct 30, 2011 8:47 pm

Hey javlin
I have done two sets myself in fact that link appeared in the triple mag in Dec 2010 and spurned me on to do mine.
I of course didnt have the tool shown so I used a couple of screwdrivers and the dining room table (

oops not a good idea if they slip as the missus will tell you

) You just have to do them really slowly and carefully, I couldnt get hold of the colour suggested for the needle so I brought few different ones and tried them all until I got the best match (wait to see the dried colour first) well worth doing though they look like new