H1 BARREL

Gard · Post by **Gard** » Mon Jul 09, 2012 6:36 pm

HI GUYS ..H1 BARRELS ONE SIZE FITS ALL AS IVE GOT A H1E THAT NEEDS 3 BARRELS...THANKS.

Peter Mac · Post by **Peter Mac** » Mon Jul 09, 2012 7:03 pm

The e onwards had 8mm exhaust studs... Earlier are 6mm, altho i believe all will fit cuts atr different on early ones.. I would look for the later ones...

scouse · Post by **scouse** » Mon Jul 09, 2012 10:51 pm

Peter Mac wrote:The e onwards had 8mm exhaust studs... Earlier are 6mm, altho i believe all will fit cuts atr different on early ones.. I would look for the later ones...

different stud positioning from early to late barrels

http://3cyl.com/mraxl/partid/cylinders/cyldif.htm

if in doubt always check the resource page

this should be your 1st stop

http://kawtriple.com/mraxl/

Big thanks to Dale for his good work

Gary T