Video of mallory session 10
- Dandare
- Expert
- Posts: 416
- Joined: Mon Feb 04, 2008 3:18 am
- Location: Caerphilly
Video of mallory session 10
This is my first attempt at doing this kind of thing, sorry for the ignition interference on the picture quality, but it will give you a taste for the good fun day we had.
See if you can spot yourself
http://www.youtube.com/watch?feature=pl ... v9KHijS2Qg
http://www.youtube.com/watch?feature=pl ... As_D065vrg
See if you can spot yourself
http://www.youtube.com/watch?feature=pl ... v9KHijS2Qg
http://www.youtube.com/watch?feature=pl ... As_D065vrg
Try and be all thing to every one, if you fail at least you tried
- Triple Parts
- Expert
- Posts: 6492
- Joined: Fri May 12, 2006 11:00 am
- Location: Lancashire Riviera
- Contact:
Dan, I don't think the interference is ignition. A wavy picture effect like that (especially on the side mounted view) is normally through vibration.
Mine does it just when I mount it on the handlebars, even though its digital with SD card and no moving parts.
What kind of mount are you using?
Mine does it just when I mount it on the handlebars, even though its digital with SD card and no moving parts.
What kind of mount are you using?
FREE Triples downloads here... https://kawatriple.net/
Triples Parts here...https://kawasakitripleparts.com/
Triples Parts here...https://kawasakitripleparts.com/
- Wolfie
- Site Admin
- Posts: 10593
- Joined: Wed May 03, 2006 8:05 pm
- Location: Back to West Yorks, but only just..
- Contact:
Yep, it's definitely a vibration thing Dan and a bugger to prevent as the slightest regular vibration will cause it in varying degrees.
I can see myself... Just to the left of the Floodlight stanchion.. white shirt above everone else, filming you all..
http://www.youtube.com/watch?v=RioF0LGT ... ature=plcp
But good vids.
I can see myself... Just to the left of the Floodlight stanchion.. white shirt above everone else, filming you all..
http://www.youtube.com/watch?v=RioF0LGT ... ature=plcp
But good vids.
Last edited by Wolfie on Tue Jul 17, 2012 12:53 pm, edited 1 time in total.
.
I used to be a werewolf, but I'm alright nooooowwwwwww!!
I used to be a werewolf, but I'm alright nooooowwwwwww!!
- Dandare
- Expert
- Posts: 416
- Joined: Mon Feb 04, 2008 3:18 am
- Location: Caerphilly
it was rubber mounted sucker thing, I used it with my R1 and i had no issues.tony_d123 wrote:Dan, I don't think the interference is ignition. A wavy picture effect like that (especially on the side mounted view) is normally through vibration.
Mine does it just when I mount it on the handlebars, even though its digital with SD card and no moving parts.
What kind of mount are you using?
Try and be all thing to every one, if you fail at least you tried
- Dandare
- Expert
- Posts: 416
- Joined: Mon Feb 04, 2008 3:18 am
- Location: Caerphilly
I had the camera on top of the tank to start and to the side to finish,ståle wrote:Better view with the camera on the side than on top of your helmet mate
I should have pluged in my external microphone over the exhaust, as the camera is picking up the engine. It's all a learning curve
Try and be all thing to every one, if you fail at least you tried
-
Ståle
- Expert
- Posts: 1630
- Joined: Mon Oct 09, 2006 10:56 am
- Location: Oslo, Norway
Dandare wrote:I had the camera on top of the tank to start and to the side to finish,ståle wrote:Better view with the camera on the side than on top of your helmet mate
I should have pluged in my external microphone over the exhaust, as the camera is picking up the engine. It's all a learning curve

- Wolfie
- Site Admin
- Posts: 10593
- Joined: Wed May 03, 2006 8:05 pm
- Location: Back to West Yorks, but only just..
- Contact:
- Dandare
- Expert
- Posts: 416
- Joined: Mon Feb 04, 2008 3:18 am
- Location: Caerphilly
-
KEVMACH4
- Expert
- Posts: 166
- Joined: Thu May 04, 2006 12:52 pm
- Location: Notts
video of mallory session 10
great video,s dan, it was a great weekend.