H2B/C Replica Exhausts

Any triple related issues, topics or stories then POST THEM HERE.......
Post Reply
User avatar
Malcolm
Expert
Posts: 2301
Joined: Thu May 04, 2006 12:52 pm
Location: Newcastle
Contact:

H2B/C Replica Exhausts

Post by Malcolm »

Much has been said over the last few years about the H2EX project to make Replica H2B/C exhauststs.
The guy doing them has had a stall at the last two Stafford shows and several people have ordered pipes, but none of us in the Triples club knew of anyone that had actually received any pipes. It was beginning to look like it wasn't going to happen. I ordered a set very early on as the prototypes he had looked pretty good and we all know how difficult these pipes are to find.
I got my first set on Sunday and I have to tell you they are absolutely spot on I have had them up against a factory set and they are an excellent fit and they look exactly the same.
The chap making them is John Bartholemew and when I picked these up I had a long chat with him about them and the process he has been through to get them to the point where he can now start to manufacture them in earnest I think we need to remember that this is one engineer manufacturer doing what an entire factory development department would normally do.
What he has achieved in his small workshop is unbelievable, he has produced a proper replica that stands comparison with the originals.
I think that delivery is always going to be slowish as they are being produced on a part time basis but these things are going on restoration projects that take months to do so pre-ordering shouldn't be a problem for us
I've posted some pictures below but take my word they are spot on. I am absolutely delighted with the product

Here's the website link. Don't be in a rush. (Think Jamaican Time :D ), but if they are like mine you will be very pleased

http://www.h2ex.co.uk/

Image
Image
Image
Image
Image
User avatar
SAM
Expert
Posts: 9442
Joined: Wed May 03, 2006 8:05 pm
Location: BIG SHED IN A NICE VILLAGE WITH A GOOD LOCAL. BEDFORDSHIRE

Re: H2B/C Replica Exhausts

Post by SAM »

Ooooooo. So nice. Might be able to buy some usable ones cheaper now??
THREES MORE FUN
User avatar
malc87
Expert
Posts: 13346
Joined: Wed May 03, 2006 8:05 pm
Location: Timperley,South Manchester

Re: H2B/C Replica Exhausts

Post by malc87 »

Not like you to want something cheap Sam Thumbs Up
downpipe3
Expert
Posts: 4653
Joined: Wed May 03, 2006 8:05 pm

Re: H2B/C Replica Exhausts

Post by downpipe3 »

malc87 wrote:Not like you to want something cheap Sam Thumbs Up
:lol: :lol: :lol:
JGerald
Posts: 6
Joined: Mon Oct 14, 2013 8:20 pm
Location: Devon

Re: H2B/C Replica Exhausts

Post by JGerald »

Yes i have received a set of these & the quality is superb. A very talented engineer & great guy to deal with. I look forward to meeting up with john again at stafford. thanks ... Gerald
User avatar
Saisei
Posts: 19
Joined: Mon Aug 11, 2014 6:07 pm
Location: Northallerton
Contact:

Re: H2B/C Replica Exhausts

Post by Saisei »

I spoke to John last week about selling his pipes through my site. Lovely guy and great pipes. :D
Image
Image Image
User avatar
Doctorpayday
Expert
Posts: 816
Joined: Tue Jun 16, 2009 10:43 pm
Location: Ascot

Re: H2B/C Replica Exhausts

Post by Doctorpayday »

I too would like to add my endorsement of H2ex pipes.

Was a bit of a wait but I had to be patient, something I am not to good at.

Doc
No Poke without Smoke.
Post Reply