Roll Up, Roll Up . . . everything must go . . .

[El Presidente]

I'm clearing everything out You may want to wander over and get some parts in the next week (by prior arrangement) or I will have a everything must go sale on the Friday of the Rally at 2pm and maybe Saturday morning at the Rally. - Those of you that have visited me in the past know how extensive (to say the least) my parts stash is

[husson73]

need a 72 frame in VGC prefer 2 tubes typ on the front cradle
KPH speedo early H1, 72 H2 green, H2B or C
H2 swing arm VGC
set of early square cutout barrels H2 STD or O;50
69 bridgeport center H1 barrel on STD to rebore
one NOS 0.5 Piston H2 first tip
any set of Asso pistons NOS with ring overbore for H2

[allo allo]

Hi Rick
For me a KPH speedo 72 H2 green

[Mark B]

why do i live so far away

[downpipe3]

i have had all the cranks
thanks Rick u now they will be put to good use to keep club members bikes going for many years to come

[TallyB]

Set of S2 pipes would be very nice.

[oldman]

A left hand h1a pipe

[h2crazy]

a nice used but straight right hand upper pipe for h2c

[El Presidente]

a nice used but straight right hand upper pipe for h2c

.
http://cgi.ebay.co.uk/ws/eBayISAPI.dll? ... RK:MESE:IT
.

[Rubbadub]

dont suppose you have an H2 gearbox going begging do you?

[Rubbadub]

set of oil pipes and a pump 3 feed for a 72/73 h2?

[El Presidente]

dont suppose you have an H2 gearbox going begging do you?

.
Just sold it to Kenny . . . I may have another . . NO oil pumps but I should have pipes . . . what I don't have is TIME to look for them, Just sorting out 180 Cylinders now (and YE, JP I will look for yours )
.

.

[Rubbadub]

if its not too personal, whats prompted this Rick?

[Hal]

That's gotta be minimum of ten grands worth of barrels there ??

[666rog]

If you have a set of kh400 pipes to dispose of i would gladly purchase a set Rick.

[Chirpy999]

Hi any chance of some pipes and headlamp brackets for a S1a?? Money burning a hole inmy pocket!!

[scouse]

dont suppose you have an H2 gearbox going begging do you?

.
Just sold it to Kenny . . . I may have another . . NO oil pumps but I should have pipes . . . what I don't have is TIME to look for them, Just sorting out 180 Cylinders now (and YE, JP I will look for yours )
.

.

Don't suppose you have a right hand 71H2 barrel on Std bore?

Gary T

[h2crazy]

a nice used but straight right hand upper pipe for h2c

.
http://cgi.ebay.co.uk/ws/eBayISAPI.dll? ... RK:MESE:IT
.

'bin watching that,prolly go ballistic at the end!!!!!

oh and I nearly forgot a h2c oilpump lever/quadrant !

[30yrs-on]

H1a...steering lock.....complete indicator set........reflectors/brackets front tank mount.

H1b.......rear lift handle

3x 6mm bolts with # 7 stamped on head,not recessed type.

thank you

Pete

[Steve Rowden]

Hi Rick.
Do you have a decent set of metalware for my H1e in burgandy?
Steve r

[blackhat400]

if its not too personal, whats prompted this Rick?

My guess " Woman ,,,, ,,,,,,,,,,,

[Tartan Triple]

strangely i am doing the very same thing h2a rev counter, one that goes past 4k