H1 Engine and gearbox inspection

Any triple related issues, topics or stories then POST THEM HERE.......
Post Reply
User avatar
Ogri211
Expert
Posts: 174
Joined: Thu Jul 09, 2015 7:48 pm
Location: Glasgow

H1 Engine and gearbox inspection

Post by Ogri211 »

I'm going to strip my engine down this week to send my crank to Gary due to the bent crank that the previous owner forgot to mention when he sold me the bike which " had just had the crank rebuilt" I will be checking the usual things but just a heads up is there anything specific to this engine that anyone can think that I should check while I have it in bits or any parts that I should replace as a matter of course I don't mean the obvious like gaskets and circlips. Thanks in advance.
Kawasaki H1B, Suzuki GT750A, Triumph Rocket3, Honda 400 four.
Eric
Expert
Posts: 2689
Joined: Wed Sep 17, 2008 9:54 am
Location: Bridgend

Re: H1 Engine and gearbox inspection

Post by Eric »

If the guy who sold you the bike is a club member then I think he should band from the club.
User avatar
SAM
Expert
Posts: 9445
Joined: Wed May 03, 2006 8:05 pm
Location: BIG SHED IN A NICE VILLAGE WITH A GOOD LOCAL. BEDFORDSHIRE

Re: H1 Engine and gearbox inspection

Post by SAM »

Gary can check all usual things. He checked over my gearbox and crank to confirm all in order.
THREES MORE FUN
User avatar
Ogri211
Expert
Posts: 174
Joined: Thu Jul 09, 2015 7:48 pm
Location: Glasgow

Re: H1 Engine and gearbox inspection

Post by Ogri211 »

I'm only sending the crank to Gary I will be doing the job myself.
Kawasaki H1B, Suzuki GT750A, Triumph Rocket3, Honda 400 four.
User avatar
Ogri211
Expert
Posts: 174
Joined: Thu Jul 09, 2015 7:48 pm
Location: Glasgow

Re: H1 Engine and gearbox inspection

Post by Ogri211 »

When I took the crank out also as well as been bent the 2 outer mains were gubbed and the cases were rejoined with blue Hylomar a common practice in the eighties I think the main thing that the seller forgot to tell me is that he is a lair. It should cure my ongoing detonation problem now that I can remove the brand new crankshaft oils seals that were just done, might make a difference.
Kawasaki H1B, Suzuki GT750A, Triumph Rocket3, Honda 400 four.
Tartan Triple
Expert
Posts: 2650
Joined: Thu May 04, 2006 12:52 pm
Location: House on the canal,Brittany

Re: H1 Engine and gearbox inspection

Post by Tartan Triple »

thats a shame,but,unless the bike has come from some one in the club with genuine history,then always expect to strip it down,its amazing what errors you can find,go through the clutch assembly,check all the dogs ,teeth and clearances on the gearbox,selector forks for wear,that the retaining bolts are tight and locked,check the plastic drive gear for missing or broken teeth,tacho drive shaft oil seal,fit copper base gaskets on rebuild,at least now you will know the bike inside out and be able to thrash it without the worry of some one elses work letting go Thumbs Up 8)
User avatar
Ogri211
Expert
Posts: 174
Joined: Thu Jul 09, 2015 7:48 pm
Location: Glasgow

Re: H1 Engine and gearbox inspection

Post by Ogri211 »

Cheers for that I was never going to be happy anyway until I had the engine apart and checked it myself I will check these bits when I get home at a glance the dogs looked good and Gary advised me on the refitting of the kick start shaft. Thumbs Up
Kawasaki H1B, Suzuki GT750A, Triumph Rocket3, Honda 400 four.
Post Reply