What's the best way to find a seat pan for an H2c model? There seem to be more about for the A and B models and smaller KH series but the longer C model seems to be extremely elusive.
When they do appear as part of a reconditioned seat they are up in the £300+ price range.
What I really want is just a seat pan and the foam, not bothered about the cover or fixings really, just the basics.
I'm starting to put together a plan to build a Two:Four style seat for my bike but they never made them for the bigger bikes so I need to cut the foam myself and design a bespoke cover and put it all together myself.
Any advice appreciated.
H2c seat pan and foam
-
Bic_Bicknell
- Expert
- Posts: 411
- Joined: Tue May 20, 2014 10:29 am
- Location: Surrey - near Gatwick
-
Neil the Don
- Expert
- Posts: 2804
- Joined: Thu May 04, 2006 12:52 pm
- Location: West Yorkshire
Re: H2c seat pan and foam
" Cheapest " way would be to buy the replica seat from Bob the Seat.
It`s a plastic base . But as you are doing a sporty seat , lighter the better ?
He may even sell you it unassembled, without cover, which would help your project .
It`s a plastic base . But as you are doing a sporty seat , lighter the better ?
He may even sell you it unassembled, without cover, which would help your project .
-
Bic_Bicknell
- Expert
- Posts: 411
- Joined: Tue May 20, 2014 10:29 am
- Location: Surrey - near Gatwick
-
Eric
- Expert
- Posts: 2689
- Joined: Wed Sep 17, 2008 9:54 am
- Location: Bridgend
Re: H2c seat pan and foam
That`s him 
-
Pops
- Expert
- Posts: 320
- Joined: Tue Sep 08, 2015 7:04 pm
- Location: Sussex
Re: H2c seat pan and foam
Bought a complete replica seat for my H1A from Bob the Seat. I am very happy with it
Pops
Pops
-
Olde Coney
- Expert
- Posts: 5633
- Joined: Wed May 03, 2006 8:05 pm
- Location: CUMBRIA
-
Wolfie
- Site Admin
- Posts: 10597
- Joined: Wed May 03, 2006 8:05 pm
- Location: Back to West Yorks, but only just..
- Contact:
Re: H2c seat pan and foam
?? B is longer so if you can get a H2b seat base, simply trim a few inches off the front edge. It is the same base for C, just shorter.
.
I used to be a werewolf, but I'm alright nooooowwwwwww!!
I used to be a werewolf, but I'm alright nooooowwwwwww!!
-
Bill
- Inter
- Posts: 71
- Joined: Fri Oct 11, 2013 6:32 pm
- Location: Bucks
Re: H2c seat pan and foam
I have an original H2C seat foam and a couple of brand new reproduction ones, along with a non-standard second hand cover, if any of these are of interest? No seat pan though, I'm afraid...
-
kwackersken
- Expert
- Posts: 704
- Joined: Fri Jun 30, 2006 9:52 am
- Location: Bucks
Re: H2c seat pan and foam
You have a PM billBill wrote:I have an original H2C seat foam and a couple of brand new reproduction ones, along with a non-standard second hand cover, if any of these are of interest? No seat pan though, I'm afraid...
K,T,E,D,R,C. ( Kawasaki Triples Euro Drag Race Champion ) 