Fork Damper Tool
Posted: Sat Apr 06, 2024 11:46 pm
There is an allen head screw in the bottom of the fork leg that fixes the damper Fork Damper Nut and when undoing or tightening, it often just spins.
Kawasaki specified a special tool to clamp the damper nut inside the fork, but a cheap 6 sided 14mm socket squashed slightly on 2 sides with a couple of long 3/8 extension bars will do the same job.
Kawasaki specified a special tool to clamp the damper nut inside the fork, but a cheap 6 sided 14mm socket squashed slightly on 2 sides with a couple of long 3/8 extension bars will do the same job.