Kh400 throttle cable routing

[Mike 1958]

hi all, having great difficulty in this task. Does the cable route left or right? The cables coming out of the silver thing are different lengths ???? I have tried numerous combinations to no avail. I can only get two of the three slides to sit on the bottom of the carb. What am I doing wrong.

Mike

IMG_1653.jpg

IMG_1654.jpg

[Mike 1958]

Purchased from ZPower

Throttle cable : S1/S2/S3 250/350/400 1971-1979 IMPEX 54012-097P-IMPEX* Item Price: £35.96 Qty X 1

[Wolfie]

Cable routes to the right of the frame spine.

There have been many cables in the past that simply did not fit properly, however, I would expect Z-Power cables to be correct.

[Mike 1958]

Hi, any idea why the cables are of different lengths. Any advice would be appreciated.

[Charlie Morriss]

I had the same slight conundrum with my S2A. Since the main cable goes to the right of the centre frame spine, my best guess was that the 2 of the same length go to the right and centre carbs and the longer cable goes to the left one. But correct me if I'm wrong.

[Mike 1958]

T Hi Charlie, I’ll give it ago with your advice. Got a bit bogged down with it today and need a rest.

Cheers

[SERPICO]

https://www.kawatriple.com/tips/cablero ... outing.htm

It's all on here with pictures.

[Mike 1958]

Cheers Serpico, only basic photos and there’s not a kh400 photo. Can used the kh250 as a guide.

Just needed a step by step tutorial I think, just can’t get my head round it.
I will take it slowly and try to sort it out.
I have had good advice from Charlie and Mark Tangoman. And Z Power maybe getting a call.

Thanks again Mike

[Mike 1958]

Hi all, all sorted now. Thanks to everyone who helped.

Cheers Mike