Page 1 of 1
Kh400 throttle cable routing
Posted: Sun Sep 28, 2025 2:15 pm
by Mike 1958

hi all, having great difficulty in this task. Does the cable route left or right? The cables coming out of the silver thing are different lengths ???? I have tried numerous combinations to no avail. I can only get two of the three slides to sit on the bottom of the carb. What am I doing wrong.

Mike


IMG_1653.jpg
IMG_1654.jpg
Re: Kh400 throttle cable routing
Posted: Sun Sep 28, 2025 5:01 pm
by Mike 1958
Purchased from ZPower
Throttle cable : S1/S2/S3 250/350/400 1971-1979 IMPEX 54012-097P-IMPEX* Item Price: ยฃ35.96 Qty X 1
Re: Kh400 throttle cable routing
Posted: Sun Sep 28, 2025 8:25 pm
by Wolfie
Cable routes to the right of the frame spine.
There have been many cables in the past that simply did not fit properly, however, I would expect Z-Power cables to be correct.
Re: Kh400 throttle cable routing
Posted: Sun Sep 28, 2025 9:06 pm
by Mike 1958
Hi, any idea why the cables are of different lengths. Any advice would be appreciated.

Re: Kh400 throttle cable routing
Posted: Sun Sep 28, 2025 10:16 pm
by Charlie Morriss
I had the same slight conundrum with my S2A. Since the main cable goes to the right of the centre frame spine, my best guess was that the 2 of the same length go to the right and centre carbs and the longer cable goes to the left one. But correct me if I'm wrong.
Re: Kh400 throttle cable routing
Posted: Sun Sep 28, 2025 11:26 pm
by Mike 1958
T

Hi Charlie, Iโll give it ago with your advice. Got a bit bogged down with it today and need a rest.
Cheers

Re: Kh400 throttle cable routing
Posted: Wed Oct 01, 2025 11:02 am
by SERPICO
Re: Kh400 throttle cable routing
Posted: Thu Oct 02, 2025 9:30 am
by Mike 1958

Cheers Serpico, only basic photos and thereโs not a kh400 photo. Can used the kh250 as a guide.
Just needed a step by step tutorial I think, just canโt get my head round it.
I will take it slowly and try to sort it out.
I have had good advice from Charlie and Mark Tangoman. And Z Power maybe getting a call.
Thanks again Mike



Re: Kh400 throttle cable routing
Posted: Fri Oct 10, 2025 8:52 am
by Mike 1958
Hi all, all sorted now. Thanks to everyone who helped.
Cheers Mike
