Page 1 of 1

relay switch

Posted: Sun Aug 30, 2009 9:43 pm
by nogger
Has anyone got a photo of where exactly the indicator relay goes on an H2A . I can't remember where goes :oops:

m

Posted: Mon Aug 31, 2009 7:07 am
by downpipe3
it hangs off the back of the battery box close to the chain oiler pump on a round rubber with a small slot in it

Posted: Fri Sep 04, 2009 5:40 pm
by nogger
Thanks did'nt see that on the back of the battery box. :oops:
Why is there 3 pins on the relay but only 2 wires to it Brown and orange ?

Posted: Fri Sep 04, 2009 6:07 pm
by kas750
sounds like you have an electronic relay.The correct one has two connectors.If you wire the electronic one up correctly the flasher rate will be more stable.Wolfie will fill you in with the neccessary...

m

Posted: Fri Sep 04, 2009 7:05 pm
by downpipe3
you have the wrong part it only has two connections

Posted: Fri Sep 04, 2009 7:32 pm
by Wolfie
Yes it is the wrong part probably from a car, but with the addition of a single wire to ground it will work and have a more stable flash rate even with the wrong (or blown) bulbs...

I'm just popping to the garage to look at the connections on mine..

Posted: Fri Sep 04, 2009 8:08 pm
by Wolfie
damm, mine is marked 'L', 'B' and 'E' which is simple..

L= Live (12v)...Brown wire.
B= Bulb...........Orange wire.
E= Earth..........New wire to a nearby earth on the frame.

I know that many of these relays have other markings for the pins, what does yours have?

Posted: Sat Sep 05, 2009 3:08 pm
by nogger
Never had good look at it with the rubber off. It appears to be a feplacemnt part seems to work OK with only the brown and orange and no earth.
Image
Image

relay switch

Posted: Mon Sep 21, 2009 8:34 pm
by KEVMACH4
my flasher on h2a is earthed properly, BUT, flashes like mad, do you think the relay is nackered, ANY HELP THERE LADS.

Posted: Mon Sep 21, 2009 8:43 pm
by Wolfie
Proper flasher does not have an earth, what type do you have?

Most likely cause of your quick flash is the wrong power bulbs in the indicators and indicator dash bulb.

RELAY SWITCH

Posted: Mon Sep 21, 2009 8:50 pm
by KEVMACH4
HI MATE, yeah i,ll have to check that out mate, thanks wolfie ,