Page 1 of 1
DON'T LAUGH!!!!!
Posted: Mon Jul 16, 2012 10:18 pm
by nogger
Since my Divorce earlier this year I've been H2less as I had to sell my lurvely H2A but for me life just without a triple in the garage.
some of my previous h2's, the blue h2 was an Italian import still with KPH clock I wonder where it is now?
And my old H2A
So I've gone completely mad and bought this pile of $#@&
It was cheap by h2B standards it needs loads as you can see but if I can help in rescuing it from the breakers which is where it was, I was too late to save the chain guard and few other things but I like doing my bit in saving these wonderful pieces of engineering
So if anybody has spare parts lying about the garage PM and let me how much you want etc.
I have clocks and front brake assembly, oil tank but we'll start with Big stuff like.
All the Crankcase covers.
Oil pump.
Side panels.
Clutch basket cover, cups, springs or whole assembly
Carbs
Kick start lever
Oil lines
Chain guard
Throttle assembly
foot brake lever and torque arm
gear lever and linkage.
It's all a big ask I know but I thought I would try here before Ebay
Thanks for reading and it's good to be back lads
m
Posted: Tue Jul 17, 2012 6:17 am
by downpipe3
will be at northern rally i have quite a few parts to sell for h1 h2 and kh
come and see me
gary c
Posted: Tue Jul 17, 2012 8:07 am
by robh1f
Could be worth giving Neil the Don a bell as he does repro stuff for H2s and a nice guy to boot! Oh don't ring him on Sunday
. Or PM him on this board? Good luck.
Posted: Tue Jul 17, 2012 9:05 am
by Malcolm
Paul
Great to see you back and in good form after the divorce
Looks a challenger this one
Posted: Tue Jul 17, 2012 1:28 pm
by Rubbadub
Got some bits and pieces, kickstart rechromed, headlamp shell, got a few drawers with bits and pieces in, give me a call on 07788746000
/ John
Posted: Tue Jul 17, 2012 1:42 pm
by malc87
What did you pay for it in the end????????
Posted: Tue Jul 17, 2012 3:06 pm
by Wolfie
We'd only laugh if it were funny, but I don't reckon either a divorce or that restoration comes under that description.. you have yer work cut out there fella.
Keep us up to date on how it goes, good luck.
Posted: Tue Jul 17, 2012 8:04 pm
by nogger
Well Mal....... I paid £1500 which I didn't think was too bad a price by todays prices, some may think I paid too much but if I watch the budget I should OK. I'm not looking to make money if I can restore it by using a mix of repro and genuine bits it will turn out decent and I'll have some fun and games along the way, I know It will never be a concours winner !!!! But for me that's what it's all about. 
Posted: Tue Jul 17, 2012 9:42 pm
by Androu
Hi Nogger,
I'd replied to your e-mail before I looked at your post. I see what you mean. However, you have a good basis to start from and if you can see beyond the .... (can't think of a work to describe what I can see) I know you'll finish up with a very clean presentable bike. Let me know how the resto goes.
Andrew
Posted: Wed Jul 18, 2012 10:04 am
by Crispy
Blimey...You will get there in the end though!.... I thought my KH was bad! kept outside for 15 years, bird & mouse nests in it, electrics full of water & corroded etc etc.
Its taking some time but this is it at the moment ( due in no small way to the help and advice received from members of this club!)
I know its not the right colour but I like it! Good luck with yours!
Posted: Wed Jul 18, 2012 5:35 pm
by Olde Coney
I like the colour too
Posted: Wed Jul 18, 2012 9:39 pm
by nogger
[quote="Crispy"]Blimey...You will get there in the end though!.... I thought my KH was bad! kept outside for 15 years, bird & mouse nests in it, electrics full of water & corroded etc etc.
Its taking some time but this is it at the moment ( due in no small way to the help and advice received from members of this club!)
I know its not the right colour but I like it! Good luck with yours
Sad to hear you lost the H2a .. I to have been down that route
What I do have, is a decent tank, clutch cover..small crack but usable, blob of weld & polish good as new.
To you Sir FOC if it helps get you a H2 on the road.
I'm at the Northern, let me know & I'll throw em in the van
Cheers David
Posted: Thu Jul 19, 2012 9:12 pm
by nogger
Posted: Fri Jul 20, 2012 8:57 am
by sportster1250
No Worries, I'll have a look in my "never through it away" chest, so what else you may be able to make use of...
See you at the Northern
Lets hope the sun comes out to play
David
Posted: Fri Jul 20, 2012 3:46 pm
by Rubbadub
nice chatting, Ill get the parts up to you Monday.
cheers / John
I'm a welder so I can sort that out no problem, I'll be at the Northern. Thanks.