rex speedshop

[Tartan Triple]

I bought a new h2 stator from rex speed shop, spent all morning trying to get the old bugger out,finaly, got it out, cleaned up the casing to fit the new one, the bastard does not fit!!!!, the coils are to big and jam on the casing, no way will this go in without damaging the coils, called, no answer, sent an email, waiting for someone to call me,hope fully another can be sent as this one is useless, and im running out of time for the southern

[husson73]

Andrew,
will be in Concarneau in August.
Can take with me a whole H2 left iggy stator which works; you could give me back later in Xmas for exemple

[Tartan Triple]

perhaps Jp, Rex speedshop after sales service, is terrible, you cannot call them, no answer,the coils of the new stator are to big, it cannot be fitted,they do not accept this, fecking terrible service

[Wolfie]

They used to be a top notch service but the complaints are ramping up now..

[Tartan Triple]

okay here are the measurements,diameters, the casing in which the stator sits is 140mm and seats on128mm where it screws on, the outer measurement between original coils is 122mm exactly, all coils, giving 6mm clearance to fit, 3mm both sides.

Rex stator, 2x2 sets coils is 125mm, thats okay, but the outside measurement between coil 5 and 6, two opposite each other, is 129mm, 129mm does not fit into a 128mm hole,no clearance, I tried it in a second casing does not fit, their answer, send it and the casing, at my cost, where they will fit it, fecking fat chance at hourly rate, and send it back to me, at my cost, well get fecked, the measurements say it all, they cannot admit its wrong, its my 400 euro mistake, service is terrible, not spoken to anyone, just smartarse answers as to how as stator works, how brilliant they are and im a dick

[Tartan Triple]

I dont hold out much hope that they will do anything about this, as a last resort,I suppose i could take a file to the casing to make the fecker fit

[Tartan Triple]

IMG_20260725_123033.jpg

IMG_20260725_122848.jpg

IMG_20260725_122738.jpg

thats why it does not fit!!

[husson73]

You're not the first to have this trouble, Alloallo had the same issue with them.
He fitted my 71 H2 stator (the whole iggy) to go to 50 years anniversary of H2 on 2022.

Say me if I take one for you Andrew

[Tilly H2C]

I bought one from them a few years ago when I think they had just released the new windings set with no exchange required, I bought it more for insurance against breaking down than any running fault and it must have fitted straight in as I dont remember having any issues

I wonder if there is some difference between the size of the stator 'case' over the years?

[Tartan Triple]

I have just sent it back, along with my casing, to prove it does not fit,and under warranty, supply a replacement, and ensure it fits the undamaged, circular casing, They do not answer the phone, tried calling for three days, sent pictures, since the last ones, they dont reply at all, sent a contact us form today, no reply, I am hoping they send back another stator and my casing back, if not who lives near Robertsbridge, that can go bang their door???

Do me a favour someone, try calling them on 01580 880 768, and see if its my phone is the problem, or they just dont answer

[Tilly H2C]

I did get through to them on another matter and the girl who answered very reluctantly handed over the phone to a Male who seemed to know what he was talking about but also wasnt in the queue when they were handing out both manners and conversation skills

[husson73]

I bought one from them a few years ago when I think they had just released the new windings set with no exchange required, I bought it more for insurance against breaking down than any running fault and it must have fitted straight in as I dont remember having any issues

I wonder if there is some difference between the size of the stator 'case' over the years?

nope I only remember that the iggy cover of later HI E F and KH 500 won't fit with the 3 pick up iggy unless it's the iggy cover with Kawasaki marked on it (all H2 and H1D) which don't fit with the 2 pick up iggy

[Tartan Triple]

Jp, merci I wait for rex to return, see you soon

[husson73]

I would take a H2 iggy with me just in case

[Neil the Don]

That`s odd ? I got one of their first ones made earlier this year. And it fitted fine........... No help for you , of course !!!