Damien has had a little makeover...

GinaG · Post by **GinaG** » Mon Jun 20, 2011 6:49 pm

Turkish wrote:very impressive chris.

Pull your tonge outta Chris's arsehole Turkish, Dogs do that!
Your not a dog are yer Turkish?

h2chris · Post by **h2chris** » Tue Jun 21, 2011 2:20 am

Hi Jim,

just type in h2chris on the YouTube search and it should list all the vids I've put up, good and bad!

I've been researching different types of ignition systems for ages as I'm just really interested in trying to improve the bike. My next one uses 2x Petronix triggers and a modified KH250 casing fitted with a Z900 stator and using the Z900 rotor as well. Rog has had this stator conversion done already so I've just copied it.

I have also splashed out a while back on a new Zeeltronic iggy system. It's for my project bike so won't get any road use for a while yet. What I like about this system is that it's well liked by the RD boys as they have the 2 channel version. It is fully programmable, can store 10x different iggy curves, a "soft" rev limiter - that means it firstly retards the timing, then reduces spark intensity and finally cuts the spark altogether. It also has a shift light output. It worked out at just over£440 inc P&P, which I think is a bargain for something with all these functions and is NEW! It also only draws 2.0A max current.

666rog · Post by **666rog** » Tue Jun 21, 2011 12:46 pm

SAM wrote:I remember @ that Southern Rally when it was run on the Dyno. Wow was that awesome.

Yes, but only 77 hp at the wheel. Last dyno run it was weak at the top end and giving 117. I think 125 at the tyre is possible with some work.

malc87 · Post by **malc87** » Tue Jun 21, 2011 3:57 pm

When will you need me to road test it

SAM · Post by **SAM** » Tue Jun 21, 2011 4:13 pm

malc87 wrote:When will you need me to road test it

Flatten those pipes

Olde Coney · Post by **Olde Coney** » Tue Jun 21, 2011 8:53 pm

malc87 wrote:When will you need me to road test it

GULP

h2chris · Post by **h2chris** » Tue Jun 21, 2011 9:08 pm

Jim,

those iggy boxes of John's are superb and make a much better replacement than the originals.

For our drag bike project, we need a system that has both the facility to retard the ignition at high rpm and have a rev limiter too.

The other ignitions I'm messing around with is purely for my road bikes. Out of interest I've found that if you require more electrical power to run halogen lights, better ignition systems, etc, you can bolt on a KH250 assembly which ups the the stock output from 4.0A to 5.5A. Or, I've just converted a KH250 casing to accept a Z900 stator & rotor and tested today gives out an impressive 11.6A! More than enough juice to power those little extras. At 1000rpm it's putting out almost 4.6A.

kas750 · Post by **kas750** » Wed Jun 22, 2011 6:36 am

Jim C wrote:Bright headlights on a Triple; didn't think it was possible; well done!

Its definitely possible!
Heres a before and after pic of a conversion i did on my kh400 using a xenon hid kit.

Post by **Wolfie** » Wed Jun 22, 2011 10:13 am

Yeah but to be honest Kas, that is too bright even in daylight it was annoying having you behind, people coming the other way must've been fecked off with yer.

scouse · Post by **scouse** » Wed Jun 22, 2011 6:41 pm

malc87 wrote:When will you need me to road test it

So you can hole a piston again!!!

Gary T

h2chris · Post by **h2chris** » Thu Jun 23, 2011 1:37 am

Adrian,

that Xenon HID kit looks the business - how much do they cost?

kas750 · Post by **kas750** » Thu Jun 23, 2011 6:30 am

Hello Chris.
It was £24.Its a h4 fitting and has a servo in the bulb holder to switch between high and low beam.

El Presidente · Post by **El Presidente** » Thu Jun 23, 2011 4:21 pm

I kept thinking it was a copper behind me - Should have been in front then we would have been O.K.

kas750 · Post by **kas750** » Thu Jun 23, 2011 4:31 pm

El Presidente wrote:I kept thinking it was a copper behind me - Should have been in front where you normally are with me struggling to catch you, then we would have been O.K.